My Inquiry
My Account
Renesas RJK0204DPA-00#J53
- Part No.:
- RJK0204DPA-00#J53
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- 8-PowerWDFN
- Datasheet:
-
RJK0204DPA-00#J53.pdf
- Description:
- MOSFET N-CH 25V 50A 8WPAK
- Quantity:
- Payment:
- Shipping:
Inventory:3,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK0204DPA-00#J53 from Renesas Electronics is a 25 V, 50 A N-channel power MOSFET with integrated Schottky body diode, 2.7 mΩ max RDS(on) at VGS = 10 V, rated for high-speed switching in DC-DC converters and motor drive half-bridges.
For engineers reviewing the RJK0204DPA-00#J53 datasheet, RJK0204DPA-00#J53 pinout, RJK0204DPA-00#J53 application, or RJK0204DPA-00#J53 equivalent, key selection criteria include gate threshold voltage (1.2–2.5 V), low 4.5 V gate drive capability, avalanche energy rating (55.1 mJ), and WPAK(3F) package thermal performance (θch-c = 2.5 °C/W).
Technical Context
This device integrates a Schottky barrier diode (SBD) to reduce reverse recovery loss and enable efficient synchronous rectification. Its low RDS(on) and fast switching (td(on) = 17 ns, tf = 11 ns) support high-frequency operation up to 1 MHz in buck converters.
The WPAK(3F) package features exposed drain pads on pins 5–8 and dual-source configuration (pins 1–3), enabling high-current conduction and low-inductance layout. Gate charge parameters (Qg = 22 nC, Qgd = 6.2 nC) are optimized for minimal Miller-induced switching delay in hard-switched topologies.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 25 V - Maximum blocking voltage in high-side switch or synchronous rectifier position |
| RDS(on) @ 4.5 V | 4.0 mΩ max - Enables direct 4.5 V logic-level gate drive without level-shifting circuitry |
| ID | 50 A continuous - Supports high-current output stages in industrial power supplies |
| Qg | 22 nC - Determines gate driver power requirement and switching loss in PWM control |
| tr/tf | 7.7 ns / 11 ns - Enables >500 kHz switching with controlled EMI in compact layouts |
| VSD | 0.39 V typ - Low forward voltage of integrated SBD reduces conduction loss during freewheeling |
| EAR | 55.1 mJ - Specifies single-pulse avalanche ruggedness for inductive load interruption |
Pinout & Package
Package: WPAK(3F), also designated PWSN0008DE-A - thermally enhanced surface-mount package with exposed drain pad (pins 5–8), 8-pin leadframe, 0.075 g mass, and 4.90 mm × 3.92 mm footprint.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3 | Source | Common source connection for low-side switching; electrically tied internally for parallel current sharing |
| 4 | Gate | Control terminal requiring ≤0.1 μA leakage; driven by 4.5–10 V logic or gate driver IC |
| 5, 6, 7, 8 | Drain | High-current drain node with thermal pad attachment; connects to PCB copper pour for θch-c = 2.5 °C/W |
Key Features
| Feature | Design Value |
|---|---|
| Integrated Schottky Body Diode | Eliminates external freewheeling diode, reduces BOM count and board area in buck/synchronous rectifier designs |
| 4.5 V Gate Drive Compatibility | Operates fully enhanced with standard 5 V logic or microcontroller GPIO, removing need for dedicated level shifters |
| Low RDS(on) × Qg Figure of Merit | 10.8 mΩ·nC - Balances conduction and switching losses for high-efficiency 100–500 kHz DC-DC stages |
| Pb-free and Halogen-free Construction | Complies with RoHS Directive 2011/65/EU and JEDEC J-STD-020 reflow profile for lead-free assembly |
| Avalanche-Rated Operation | Rated for repetitive unclamped inductive switching (IAP = 21 A, EAR = 55.1 mJ) without derating in motor drive H-bridge legs |
Applications
| DC-DC Buck Converter | BLDC Motor Half-Bridge |
|---|---|
Use Scenario: 12 V input to 3.3 V/50 A output step-down regulator in telecom power shelf. IC Role / Device Role / Timing Role: High-side synchronous rectifier MOSFET in multiphase buck stage. Use Value: 2.7 mΩ RDS(on) minimizes conduction loss at 50 A; integrated SBD eliminates reverse recovery loss during dead-time. |
Use Scenario: Upper-leg switch in 24 V, 3-phase BLDC driver for industrial fans. IC Role / Device Role / Timing Role: High-current, high-dV/dt switching element in inverter leg with 100 ns dead-time. Use Value: 55.1 mJ avalanche energy withstands inductive kickback during commutation; 4.5 V gate drive simplifies gate driver design. |
| USB-C PD Power Delivery | Server VRM High-Side Switch |
Use Scenario: 20 V input path switch in USB-C PD sink adapter supporting 60 W delivery. IC Role / Device Role / Timing Role: Input protection and load switch controlling power entry to buck controller. Use Value: Low 4.0 mΩ RDS(on) at 4.5 V ensures <100 mW conduction loss at 5 A; Pb-free plating supports automated reflow. |
Use Scenario: High-side switch in 48 V to 1 V server VRM delivering >300 A to CPU core. IC Role / Device Role / Timing Role: Primary power FET in interleaved multiphase buck converter stage. Use Value: WPAK(3F) package enables 2.5 °C/W thermal resistance to heatsink; 22 nC Qg allows fast turn-on with low-driver power consumption. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar N-channel power MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IRL3803PBF | RDS(on) = 3.0 mΩ @ 10 V; no integrated SBD; TO-220AB package; higher θJA (62 °C/W) | Lacks body diode optimization; requires external diode for synchronous rectification; unsuitable for space-constrained layouts | Select when cost sensitivity outweighs integration benefits and thermal constraints allow TO-220 mounting |
| SiR872DP-T1-GE3 | RDS(on) = 2.3 mΩ @ 10 V; no integrated SBD; PowerPAK SO-8; Qg = 32 nC; lower avalanche rating (EAR = 27 mJ) | Higher gate charge increases driver loss; lower avalanche energy limits use in inductive motor drives | Prefer for high-efficiency, low-RDS(on) requirements where avalanche stress is absent and SBD not needed |
Compared with IRL3803PBF and SiR872DP-T1-GE3, RJK0204DPA-00#J53 uniquely combines integrated Schottky body diode, 4.5 V gate drive, and 55.1 mJ avalanche rating in a thermally optimized WPAK(3F) package-making it optimal for compact, high-reliability synchronous buck and motor drive designs where diode recovery and inductive transients are critical.
Availability
RJK0204DPA-00#J53 is available at Aetrix Electronics and suitable for DC-DC converters, BLDC motor drivers, and USB-C PD power switches requiring stable component supply, long-term lifecycle assurance, and RoHS-compliant sourcing.
Supply support for RJK0204DPA-00#J53 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and infrastructure markets.
The RJK0204DPA-00#J53 belongs to Renesas' WPAK-series power MOSFET product line, engineered for high-current, high-efficiency switching in space-constrained power conversion systems where thermal performance and integrated functionality are critical.
FAQ
What is the maximum continuous drain current rating for RJK0204DPA-00#J53?
The RJK0204DPA-00#J53 has a continuous drain current (ID) rating of 50 A at Tc = 25 °C. This rating assumes proper PCB copper pour and thermal management per the WPAK(3F) package's 2.5 °C/W channel-to-case thermal impedance. At elevated case temperatures, derating applies per the "Power vs. Temperature Derating" curve on page 3 of the R07DS0944EJ0400 datasheet.
Does RJK0204DPA-00#J53 include an integrated body diode, and what is its forward voltage?
Yes, RJK0204DPA-00#J53 integrates a Schottky Barrier Diode (SBD) between source and drain. Its typical forward voltage (VDF) is 0.39 V at IF = 2 A and VGS = 0 V, as specified in the Electrical Characteristics table on page 2 of the R07DS0944EJ0400 datasheet. This low VF reduces conduction loss during freewheeling compared to conventional MOSFET body diodes.
Can RJK0204DPA-00#J53 be driven directly from a 3.3 V microcontroller GPIO?
No - RJK0204DPA-00#J53 is not guaranteed to fully enhance at 3.3 V. Its gate threshold voltage (VGS(off)) ranges from 1.2 V to 2.5 V, but RDS(on) is specified only at VGS = 4.5 V (max 4.0 mΩ) and 10 V (max 2.7 mΩ). Driving from 3.3 V may result in excessive conduction loss and thermal instability; a 5 V gate driver or level shifter is recommended for reliable operation.
What is the avalanche energy rating of RJK0204DPA-00#J53, and under what conditions is it tested?
RJK0204DPA-00#J53 has a single-pulse avalanche energy (EAR) rating of 55.1 mJ, measured at Tch = 25 °C with Rg ≥ 50 Ω and IAP = 21 A, per Note 2 in the Absolute Maximum Ratings table. This rating validates robustness against inductive switching transients in motor drive and relay-driving applications.
What is the package type and thermal resistance of RJK0204DPA-00#J53?
RJK0204DPA-00#J53 uses the WPAK(3F) package (RENESAS code PWSN0008DE-A), a surface-mount leadframe package with 4.90 mm × 3.92 mm footprint and exposed drain pad. Its channel-to-case thermal impedance (θch-c) is 2.5 °C/W at Tc = 25 °C, enabling high-power dissipation when mounted on adequate PCB copper area.
RJK0204DPA-00#J53 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- 8-PowerWDFN
- Packaging:
- Bulk
- Product Status:
- Obsolete
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 25 V
- Current - Continuous Drain (Id) @ 25°C:
- 50A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- 2.7mOhm @ 25A, 10V
- Vgs(th) (Max) @ Id:
- 2.5V @ 1mA
- Gate Charge (Qg) (Max) @ Vgs:
- 22 nC @ 4.5 V
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- 4240 pF @ 10 V
- FET Feature:
- -
- Power Dissipation (Max):
- -
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-WPAK
RJK0204DPA-00#J53 FAQ
1.How can I place an order for RJK0204DPA-00#J53 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK0204DPA-00#J53 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK0204DPA-00#J53 reliable?
The price and inventory of RJK0204DPA-00#J53 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK0204DPA-00#J53 is usually 5 days.
3.What payment methods are accepted for RJK0204DPA-00#J53?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK0204DPA-00#J53 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK0204DPA-00#J53?
RJK0204DPA-00#J53 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK0204DPA-00#J53 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK0204DPA-00#J53?
For technical support, including RJK0204DPA-00#J53 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK0204DPA-00#J53 requirements.
6.How does Aetrix verify that RJK0204DPA-00#J53 is sourced from the original manufacturer or authorized distributors?
All RJK0204DPA-00#J53 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK0204DPA-00#J53 meets industry standards.
7.What is the process for return or replacement of RJK0204DPA-00#J53?
All RJK0204DPA-00#J53 units undergo pre-shipment inspection (PSI). If there is an issue with RJK0204DPA-00#J53, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK0204DPA-00#J53 part is unused and in its original packaging.
Return procedure for RJK0204DPA-00#J53:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK0204DPA-00#J53 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
