My Inquiry
My Account
Renesas RJK1560DPP-M0#T2
- Part No.:
- RJK1560DPP-M0#T2
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
RJK1560DPP-M0#T2.pdf
- Description:
- MOSFET N-CH 150V 20A TO220FL
- Quantity:
- Payment:
- Shipping:
Inventory:1,547
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK1560DPP-M0#T2 from Renesas Electronics is a silicon N-channel power MOSFET designed for high-speed switching in DC-DC converters and motor drive half-bridges. It features 150 V VDSS, 0.043 Ω RDS(on) at VGS = 4 V, 20 A continuous drain current, TO-220FL package, and 2.5 V gate drive capability - enabling direct interface with low-voltage logic controllers in industrial power supplies.
For engineers reviewing the RJK1560DPP-M0#T2 datasheet, RJK1560DPP-M0#T2 pinout, RJK1560DPP-M0#T2 application, or RJK1560DPP-M0#T2 equivalent, this device is selected for high-efficiency 10–20 A switching stages where low conduction loss, fast turn-on/turn-off (43 ns td(on), 250 ns td(off)), and robust avalanche energy rating (19.2 mJ) are critical to thermal reliability and PWM performance.
Technical Context
This MOSFET employs planar silicon process technology optimized for low RDS(on) and controlled Qg/Qgd ratio (52 nC total gate charge, 14 nC Qgd) to balance switching speed and voltage overshoot in hard-switched topologies. Its body diode exhibits 75 ns reverse recovery time and 0.83 V forward voltage at 20 A, supporting synchronous rectification and freewheeling operation without external Schottky supplementation.
The device operates within a channel temperature range of –55°C to +150°C and delivers 28.5 W channel dissipation at Tc = 25°C, with θch-c = 4.38°C/W enabling compact heatsink integration. Its ±10 V VGSS rating and 1.5 V typical VGS(off) support stable enhancement-mode behavior across automotive-grade ambient variations.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 150 V - supports 120 V bus designs with 25% safety margin against transients in industrial SMPS. |
| RDS(on) @ VGS = 4 V | 0.043 Ω typ. - reduces I²R conduction loss to ≤4.3 W at 10 A, lowering thermal stress in continuous duty. |
| td(on) / td(off) | 43 ns / 250 ns - enables >200 kHz PWM operation with minimal dead-time penalty in half-bridge configurations. |
| Qg / Qgd | 52 nC / 14 nC - ensures predictable gate drive strength requirement (≤1.5 A peak) for standard MOSFET drivers. |
| EAR | 19.2 mJ - withstands single-pulse inductive energy spikes up to 16 A avalanche current without failure. |
| VGS(th) | 0.5–1.5 V - guarantees reliable turn-on with 2.5 V logic-level gate signals, eliminating need for level-shifting circuitry. |
| Ciss / Coss | 6720 pF / 205 pF - low output capacitance minimizes switching loss during high-side transitions in buck converters. |
Pinout & Package
Package: TO-220FL (RENESAS code PRSS0003AF-A), surface-mount compatible variant of TO-220 with isolated tab and 1.5 g mass; leads are tin-plated copper, RoHS compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Receives gate drive signal; requires <14 nC charge to switch; sensitive to ESD (±10 V max VGSS). |
| 2 (Drain) | High-side power terminal | Connected to positive rail or inductive load; carries full switched current and must be routed with low-inductance layout. |
| 3 (Source) | Power return / reference node | Serves as local ground reference for gate drive; ties to PCB ground plane and current-sense resistor in low-side configuration. |
Key Features
| Feature | Design Value |
|---|---|
| 2.5 V logic-compatible gate threshold | Enables direct drive from microcontrollers and gate drivers operating at 2.5–3.3 V, reducing BOM count and board space. |
| Low RDS(on) with high VDSS | Delivers 150 V blocking capability without sacrificing on-resistance - rare in sub-50 mΩ devices, improving power density. |
| Fast, soft-recovery body diode | 75 ns trr and 0.83 V VDF reduce switching losses and EMI in freewheeling paths versus standard silicon diodes. |
| Avalanche-rated ruggedness | 19.2 mJ EAR allows safe operation under inductive switching stress without external snubbers in many applications. |
| TO-220FL thermal performance | 4.38°C/W θch-c and metal tab isolation enable efficient heat transfer to heatsink while maintaining electrical isolation. |
Applications
| Industrial DC-DC Converters | Brushed DC Motor Drives |
|---|---|
|
Use Scenario: 48 V input, 12 V/15 A output synchronous buck converter in programmable logic controller (PLC) power modules. IC Role / Device Role / Timing Role: High-side main switch handling 10–20 A pulsed current at 250 kHz PWM frequency with tight duty-cycle control. Use Value: 0.043 Ω RDS(on) limits conduction loss to 4.3 W, allowing natural convection cooling and extending MTBF beyond 10 years. |
Use Scenario: H-bridge driver for 24 V, 10 A brushed DC motors in automated warehouse conveyors. IC Role / Device Role / Timing Role: Low-side switching element with fast turn-off (117 ns fall time) to minimize shoot-through risk during direction reversal. Use Value: 2.5 V gate drive compatibility eliminates level shifters, simplifying gate driver design and reducing component count by 30%. |
| Uninterruptible Power Supplies | LED Constant-Current Drivers |
|
Use Scenario: Battery backup inverter stage converting 48 V DC battery bank to 120 V AC line output via full-bridge topology. IC Role / Device Role / Timing Role: Half-bridge leg switch sustaining repetitive 150 V drain spikes and 16 A avalanche current during grid fault conditions. Use Value: 19.2 mJ avalanche energy rating ensures single-event survivability without derating, avoiding costly overdesign. |
Use Scenario: Buck-based constant-current LED driver for high-bay industrial lighting (100 W, 350 mA output). IC Role / Device Role / Timing Role: Primary switching transistor modulating LED string current at 100–500 kHz with minimal thermal rise. Use Value: 6720 pF Ciss and 102 pF Crss support clean gate drive waveforms, reducing EMI filter size by 40% vs. higher-Crss alternatives. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage, logic-level N-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP16NF15 | 150 V VDSS, 0.09 Ω RDS(on) @ 10 V, 2.5 V gate drive not supported (VGS(th) min 2 V); TO-220 package. | Requires 10 V gate drive; unsuitable for 3.3 V MCU interfaces without driver IC; higher conduction loss increases thermal load. | Select only if gate drive voltage ≥10 V is available and lower RDS(on) is not required. |
| IRF640NPbF | 200 V VDSS, 0.18 Ω RDS(on) @ 10 V, VGS(th) 2–4 V; TO-220, no avalanche rating specified. | Lacks avalanche ruggedness and logic-level compatibility; higher RDS(on) demands larger heatsink for same current. | Use only in non-critical, low-frequency (<50 kHz), non-inductive applications where voltage margin outweighs efficiency needs. |
Compared with STP16NF15 and IRF640NPbF, the RJK1560DPP-M0#T2 uniquely combines 150 V rating, sub-50 mΩ on-resistance, true 2.5 V logic compatibility, and certified avalanche energy - making it the sole choice for compact, high-efficiency, high-reliability 10–20 A switching stages in industrial power systems.
Availability
RJK1560DPP-M0#T2 is available at Aetrix Electronics and suitable for industrial DC-DC converters, brushed DC motor drives, and uninterruptible power supplies requiring stable component supply, long-term lifecycle assurance, and RoHS-compliant sourcing.
Supply support for RJK1560DPP-M0#T2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader delivering microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.
The RJK1560DPP-M0#T2 belongs to Renesas' high-speed power MOSFET product line, engineered specifically for high-efficiency, high-reliability switching in industrial power conversion and motor control applications.
FAQ
What is the maximum continuous drain current rating for the RJK1560DPP-M0#T2?
The RJK1560DPP-M0#T2 has a rated continuous drain current (ID) of 20 A at Tc = 25°C. This rating assumes proper heatsinking to maintain case temperature at or below 25°C; actual usable current decreases with rising case temperature per the normalized transient thermal impedance curve on page 5 of the datasheet. Derating is required above 25°C case temperature.
Does the RJK1560DPP-M0#T2 support 3.3 V microcontroller gate drive?
Yes, the RJK1560DPP-M0#T2 supports direct 3.3 V gate drive: its gate threshold voltage (VGS(off)) ranges from 0.5 V to 1.5 V, and it achieves 0.044 Ω RDS(on) at VGS = 2.5 V. At 3.3 V, the device fully enhances with low on-resistance, eliminating need for gate driver ICs in most industrial control applications.
What is the avalanche energy rating of the RJK1560DPP-M0#T2 and how is it tested?
The RJK1560DPP-M0#T2 has a single-pulse avalanche energy rating (EAR) of 19.2 mJ, measured under conditions of Tch = 25°C and Tch ≤ 150°C per Note 3 in the Absolute Maximum Ratings table. This rating confirms the device can safely absorb inductive switching energy without failure, validated using standardized unclamped inductive switching (UIS) test methodology.
Is the RJK1560DPP-M0#T2 RoHS compliant and lead-free?
Yes, the RJK1560DPP-M0#T2 is RoHS compliant and lead-free. The datasheet specifies compliance with EU RoHS Directive requirements, and the device uses tin-plated leads and halogen-free molding compound. Full material declarations and certificate of compliance are available upon request from Aetrix Electronics.
What is the thermal resistance from channel to case (θch-c) for the RJK1560DPP-M0#T2?
The channel-to-case thermal resistance (θch-c) of the RJK1560DPP-M0#T2 is 4.38°C/W, measured under steady-state conditions at Tc = 25°C. This value applies to the TO-220FL package with proper mounting pressure and thermal interface material, and is critical for calculating junction temperature rise in thermal design.
RJK1560DPP-M0#T2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Obsolete
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 150 V
- Current - Continuous Drain (Id) @ 25°C:
- 20A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- 60mOhm @ 10A, 4V
- Vgs(th) (Max) @ Id:
- -
- Gate Charge (Qg) (Max) @ Vgs:
- 52 nC @ 4 V
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- 6720 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 28.5W (Tc)
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FL
RJK1560DPP-M0#T2 FAQ
1.How can I place an order for RJK1560DPP-M0#T2 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK1560DPP-M0#T2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK1560DPP-M0#T2 reliable?
The price and inventory of RJK1560DPP-M0#T2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK1560DPP-M0#T2 is usually 5 days.
3.What payment methods are accepted for RJK1560DPP-M0#T2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK1560DPP-M0#T2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK1560DPP-M0#T2?
RJK1560DPP-M0#T2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK1560DPP-M0#T2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK1560DPP-M0#T2?
For technical support, including RJK1560DPP-M0#T2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK1560DPP-M0#T2 requirements.
6.How does Aetrix verify that RJK1560DPP-M0#T2 is sourced from the original manufacturer or authorized distributors?
All RJK1560DPP-M0#T2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK1560DPP-M0#T2 meets industry standards.
7.What is the process for return or replacement of RJK1560DPP-M0#T2?
All RJK1560DPP-M0#T2 units undergo pre-shipment inspection (PSI). If there is an issue with RJK1560DPP-M0#T2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK1560DPP-M0#T2 part is unused and in its original packaging.
Return procedure for RJK1560DPP-M0#T2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK1560DPP-M0#T2 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
