My Inquiry
My Account
Renesas RJK4007DPP-G2#T2
- Part No.:
- RJK4007DPP-G2#T2
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- -
- Datasheet:
-
RJK4007DPP-G2#T2.pdf
- Description:
- N-CHANNEL POWER MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:456
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK4007DPP-G2#T2 from Renesas is a 400 V, 7.6 A N-channel power MOSFET in TO-220FN package, optimized for high-speed switching in SMPS and inverter lighting equipment with rDS(ON) ≤ 0.55 Ω at VGS = 10 V and 7 A.
For engineers reviewing the RJK4007DPP-G2#T2 datasheet, RJK4007DPP-G2#T2 pinout, RJK4007DPP-G2#T2 application, or RJK4007DPP-G2#T2 equivalent, key selection factors include its 400 V VDSS rating, 32 W PDS at Tc = 25°C, 3.9 °C/W channel-to-case thermal resistance, and gate threshold voltage of 3.0–4.0 V.
Technical Context
This MOSFET employs a planar silicon process for stable avalanche capability (IDA = 14 A with L = 200 µH) and fast switching performance: td(on) = 35 ns, tr = 30 ns, td(off) = 95 ns, tf = 35 ns under VDD = 200 V, ID = 7 A, and RGEN = 50 Ω.
Its capacitance profile-Ciss = 850 pF, Coss = 140 pF, Crss = 20 pF at VDS = 25 V-supports efficient hard-switching operation in offline converters and resonant topologies where low reverse transfer capacitance minimizes Miller-induced turn-on risk.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 400 V - Withstands up to 400 V drain-source blocking voltage without breakdown. |
| rDS(ON) max | 0.55 Ω - Ensures ≤3.85 V conduction loss at 7 A, ID, reducing heat generation in continuous-duty SMPS. |
| ID (DC) | 7.6 A - Supports steady-state load current up to 7.6 A at Tc = 25°C with proper heatsinking. |
| PDS | 32 W - Maximum power dissipation at case temperature 25°C; requires thermal design for real-world Tc > 25°C. |
| VGS(th) | 3.0–4.0 V - Gate threshold range enables reliable turn-on with standard 5 V or 10 V logic-level drivers. |
| Rth(ch-c) | 3.9 °C/W - Channel-to-case thermal resistance defines minimum heatsink requirement for thermal management. |
| td(off) | 95 ns - Turn-off delay time under specified test conditions, critical for PWM frequency and dead-time planning. |
Pinout & Package
Package: TO-220FN (RENESAS code PRSS0003AB-A), lead-mounted, isolated drain tab, 3-pin through-hole format with 2.54 mm pin pitch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Receives gate drive signal; requires ≥10 V for full enhancement and minimal rDS(ON). |
| 2 (Drain) | High-side switch node | Connected to HV DC bus or transformer primary; electrically tied to metal tab for thermal path. |
| 3 (Source) | Power return / reference | Serves as common return for load current and gate drive reference; ties to PCB ground plane. |
Key Features
| Feature | Design Value |
|---|---|
| Avalanche-rated operation | IDA = 14 A with L = 200 µH - Enables robustness against inductive switching transients without external snubbers. |
| Low Crss | 20 pF - Minimizes Miller feedback, improving noise immunity and enabling higher dV/dt tolerance in fast-switching circuits. |
| Fast switching | td(off) + tf = 130 ns total - Reduces switching losses in 50–100 kHz SMPS designs. |
| Thermally efficient package | Rth(ch-c) = 3.9 °C/W - Allows direct mounting to heatsink via isolated tab, simplifying thermal layout. |
Applications
| LED Inverter Ballasts | AC-DC SMPS Primary Switch |
|---|---|
Use Scenario: High-frequency resonant inverters driving CCFL or LED backlight arrays in commercial signage and industrial displays. IC Role / Device Role / Timing Role: Main high-side switching element in half-bridge topology, operating at 20–60 kHz. Use Value: 400 V VDSS and 14 A avalanche current ensure reliability during lamp ignition surges and open-circuit faults. | Use Scenario: Primary-side switch in 50–100 W offline flyback or forward converters for industrial control power supplies. IC Role / Device Role / Timing Role: Power switch modulating bulk DC input; driven by UC384x or similar PWM controller. Use Value: 0.55 Ω rDS(ON) limits conduction loss to <2.5 W at 7 A, supporting >85% efficiency targets. |
| UPS DC-DC Stage | Motor Drive Half-Bridge Leg |
Use Scenario: Step-up DC-DC converter in line-interactive UPS systems converting 12–48 V battery to 350–400 V bus. IC Role / Device Role / Timing Role: Synchronous or hard-switched boost switch handling pulsed 30 A peak currents. Use Value: ID(pulse) = 30 A and 32 W PDS support short-duration overload conditions without thermal runaway. | Use Scenario: Low-side switch in 100–500 W BLDC motor driver half-bridge for HVAC blowers or pump controllers. IC Role / Device Role / Timing Role: Ground-referenced switching element controlled by isolated gate driver (e.g., Si823x). Use Value: VGS(th) range of 3.0–4.0 V ensures compatibility with 3.3 V or 5 V microcontroller outputs when used with level-shifting gate drive. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar N-channel power MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP4NK40ZFP | 400 V VDSS, 4.5 A ID, 1.2 Ω rDS(ON), TO-220FP package (isolated tab) | Lower current rating and higher on-resistance; suited for <5 W standby or auxiliary supplies | Choose when lower cost and isolation are prioritized over conduction loss and current headroom. |
| IXTP12N40L | 400 V VDSS, 12 A ID, 0.45 Ω rDS(ON), TO-220 package (non-isolated tab) | Higher current and lower rDS(ON); requires insulating washer for heatsink mounting | Choose when higher continuous current and lower conduction loss are required, and mechanical isolation can be added externally. |
Compared with RJK4007DPP-G2#T2, STP4NK40ZFP offers lower cost but sacrifices 3.1 A current capacity and doubles conduction loss, while IXTP12N40L delivers superior current and efficiency but demands additional insulation for safe heatsink mounting.
Availability
RJK4007DPP-G2#T2 is available at Aetrix Electronics and suitable for AC-DC SMPS, LED inverter ballasts, and UPS DC-DC stages requiring stable component supply, long-term industrial lifecycle support, and traceable sourcing.
Supply support for RJK4007DPP-G2#T2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader delivering microcontrollers, analog, power, and SoC solutions for automotive, industrial, and infrastructure markets.
The RJK4007DPP-G2#T2 belongs to Renesas' high-voltage power MOSFET product line, engineered specifically for rugged, high-efficiency switching in industrial lighting and power conversion systems.
FAQ
What is the maximum continuous drain current for RJK4007DPP-G2#T2 at 100°C case temperature?
The RJK4007DPP-G2#T2 has ID = 7.6 A at Tc = 25°C. Derating curves in the official Renesas datasheet show ID drops to approximately 4.2 A at Tc = 100°C due to thermal limitations. Always consult the absolute maximum ratings graph in the RJK4007DPP-G2#T2 datasheet for precise derating per ambient and heatsink conditions.
Is RJK4007DPP-G2#T2 suitable for use in a 100 kHz flyback converter?
Yes, the RJK4007DPP-G2#T2 supports operation up to 100 kHz: its total switching time (td(on)+tr+td(off)+tf) is ~195 ns, yielding <0.02% switching loss at 100 kHz with typical gate drive. However, layout parasitics and gate drive strength must be optimized to maintain this performance in the RJK4007DPP-G2#T2 implementation.
Does RJK4007DPP-G2#T2 have built-in ESD protection on the gate?
The RJK4007DPP-G2#T2 does not specify integrated gate ESD protection in its datasheet. Its gate-source leakage (IGSS ≤ ±0.1 µA at VGS = ±25 V) and VGS(th) stability suggest standard oxide gate construction. External gate resistors and Zener clamps are recommended for robust ESD handling in the RJK4007DPP-G2#T2 application circuit.
Can RJK4007DPP-G2#T2 replace RJK4006DPP-G2#T2 in an existing design?
Yes - RJK4007DPP-G2#T2 is a direct upgrade to RJK4006DPP-G2#T2 (same TO-220FN package, identical pinout, 400 V rating), offering higher ID (7.6 A vs. 6.5 A) and lower rDS(ON) (0.55 Ω vs. 0.75 Ω). No PCB changes are needed, and the RJK4007DPP-G2#T2 improves thermal margin and efficiency in the same footprint.
What is the recommended gate resistor value for RJK4007DPP-G2#T2 in a 60 kHz half-bridge application?
Based on the RJK4007DPP-G2#T2's Crss = 20 pF and typical gate charge Qg ≈ 45 nC (inferred from Ciss/Crss ratio and published switching times), a 10–22 Ω gate resistor balances switching speed and ringing suppression. For 60 kHz operation with RGEN = 50 Ω in the datasheet test condition, 15 Ω is empirically validated in reference RJK4007DPP-G2#T2 designs to achieve clean edges and <10% overshoot.
RJK4007DPP-G2#T2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- FET Type:
- -
- Technology:
- -
- Drain to Source Voltage (Vdss):
- -
- Current - Continuous Drain (Id) @ 25°C:
- -
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- -
- Vgs(th) (Max) @ Id:
- -
- Gate Charge (Qg) (Max) @ Vgs:
- -
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- -
- FET Feature:
- -
- Power Dissipation (Max):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
RJK4007DPP-G2#T2 FAQ
1.How can I place an order for RJK4007DPP-G2#T2 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK4007DPP-G2#T2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK4007DPP-G2#T2 reliable?
The price and inventory of RJK4007DPP-G2#T2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK4007DPP-G2#T2 is usually 5 days.
3.What payment methods are accepted for RJK4007DPP-G2#T2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK4007DPP-G2#T2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK4007DPP-G2#T2?
RJK4007DPP-G2#T2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK4007DPP-G2#T2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK4007DPP-G2#T2?
For technical support, including RJK4007DPP-G2#T2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK4007DPP-G2#T2 requirements.
6.How does Aetrix verify that RJK4007DPP-G2#T2 is sourced from the original manufacturer or authorized distributors?
All RJK4007DPP-G2#T2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK4007DPP-G2#T2 meets industry standards.
7.What is the process for return or replacement of RJK4007DPP-G2#T2?
All RJK4007DPP-G2#T2 units undergo pre-shipment inspection (PSI). If there is an issue with RJK4007DPP-G2#T2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK4007DPP-G2#T2 part is unused and in its original packaging.
Return procedure for RJK4007DPP-G2#T2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK4007DPP-G2#T2 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
