My Inquiry
My Account
Renesas RJK5013DPP-00#T2
- Part No.:
- RJK5013DPP-00#T2
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
RJK5013DPP-00#T2.pdf
- Description:
- RJK5013DPP - N CHANNEL MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:2,494
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK5013DPP-00#T2 from Renesas Electronics is an 800 V, 16 A RMS planar passivated triac in TO-220AB package, designed for medium-power AC phase control in resistive and inductive loads. It delivers 160 A non-repetitive surge current, supports 150°C junction operation, and features 1.5 V typical on-state voltage at 25 A with gate trigger current ≤30 mA across all quadrants.
For engineers reviewing the RJK5013DPP-00#T2 datasheet, RJK5013DPP-00#T2 pinout, RJK5013DPP-00#T2 application, or RJK5013DPP-00#T2 equivalent, key selection criteria include repetitive off-state voltage (800 V), thermal resistance (1.8 °C/W j-c), critical dv/dt immunity (10 V/μs at 125°C), and gate trigger robustness under high-temperature conditions.
Technical Context
This triac operates in all four quadrants with symmetrical gate trigger characteristics: IFGTI, IRGTI, and IRGTIII each ≤30 mA at 25°C with 6 V device voltage and 330 Ω gate resistor. Its planar passivation structure ensures stable blocking performance up to 800 V VDRM and 960 V VDSM.
Thermal design centers on a low 1.8 °C/W junction-to-case thermal resistance, enabling 16 A RMS conduction at Tc = 118°C. Critical commutation parameters are specified at 125°C and 150°C: (dv/dt)c ≥10 V/μs and (di/dt)c = –8 A/ms under inductive load conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDRM | 800 V - Sustains full AC line voltage in 230 VAC systems with margin for transients. |
| IT(RMS) | 16 A - Supports continuous load current for motor starters, heater controls, and power supplies. |
| VTM | ≤1.5 V - Minimizes conduction loss and heatsink requirements at rated current. |
| Tj max | +150°C - Enables reliable operation in enclosed industrial enclosures without forced cooling. |
| Rth(j-c) | 1.8 °C/W - Allows direct mounting to standard TO-220 heatsinks for thermal management. |
| (dv/dt)c | 10 V/μs at 125°C - Resists false triggering during fast voltage transients in inductive switching. |
| IGM / PGM | 2 A / 5 W peak - Accommodates standard RC-triggered gate drive circuits with transient headroom. |
Pinout & Package
Package: TO-220AB (RENESAS code PRSS0004AG-A), non-insulated, planar passivated, with T2 tab serving as thermal and electrical connection point.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (T1) | Main terminal 1 | Anode for quadrant I/III operation; primary current path entry in standard AC switch configuration. |
| 2 (T2) | Main terminal 2 | Cathode for quadrant I/III; electrically and thermally connected to metal tab for heatsinking. |
| 3 (Gate) | Control input | Triggers conduction in all four quadrants; requires ≤30 mA pulse for reliable turn-on at 25°C. |
| 4 (T2) | Main terminal 2 (duplicate) | Second physical connection to same T2 node; improves mechanical stability and current sharing in high-current PCB layouts. |
Key Features
| Feature | Design Value |
|---|---|
| Quadrant III gate sensitivity | IRGTIII ≤30 mA ensures reliable triggering with negative gate pulses in AC half-cycle control. |
| High-temperature dv/dt immunity | 10 V/μs at 125°C prevents spurious turn-on during EMI-rich industrial environments. |
| Low thermal resistance | 1.8 °C/W j-c enables 16 A RMS operation with minimal heatsink volume in space-constrained designs. |
| Non-repetitive surge rating | 160 A ITSM supports motor inrush and transformer magnetizing current without failure. |
| Planar passivation | Stable VDRM and IDRM over lifetime, even under humidity and temperature cycling stress. |
Applications
| Industrial Heater Control | AC Motor Starter |
|---|---|
|
Use Scenario: Phase-angle controlled heating in industrial ovens and furnaces operating at 230 VAC/50 Hz. IC Role / Device Role / Timing Role: Main AC power switch regulating power delivery via firing angle adjustment. Use Value: 800 V VDRM provides 3× safety margin over 230 VAC peak (325 V), ensuring long-term reliability under line surges. |
Use Scenario: Soft-start and on/off control of single-phase induction motors in HVAC blowers and pumps. IC Role / Device Role / Timing Role: Bidirectional AC switch triggered by zero-crossing or phase-controlled logic. Use Value: 160 A ITSM handles 6× motor locked-rotor current without degradation, eliminating need for contactor backup. |
| Power Supply Inrush Limiter | Lighting Dimmer Module |
|
Use Scenario: Inrush current limiting for switched-mode power supply input stages using NTC bypass control. IC Role / Device Role / Timing Role: Series-connected AC switch activated after NTC cooldown to sustain full-line voltage. Use Value: 1.5 V VTM minimizes steady-state conduction loss, reducing thermal load on heatsink by >25% vs. higher-VTM alternatives. |
Use Scenario: Leading-edge dimming for incandescent and magnetic low-voltage lighting transformers. IC Role / Device Role / Timing Role: AC mains switch synchronized to zero-crossing for precise phase-cut dimming. Use Value: Symmetric gate trigger (IFGTI = IRGTI = IRGTIII ≤30 mA) ensures consistent dimming curve across full 0–100% range. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac-based AC control applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BCR16CM-16LB#BH0 | Same VDRM (800 V), IT(RMS) (16 A), TO-220ABA package; slightly higher Rth(j-c) (2.0 °C/W). | Identical functional role but requires minor heatsink derating due to +0.2 °C/W thermal resistance. | Select when TO-220ABA footprint is fixed and gate trigger margin >30 mA is acceptable. |
| Q6016LH4 | 600 V VDRM, 16 A IT(RMS), TO-220AB; lower dv/dt immunity (6 V/μs at 125°C); same 30 mA gate trigger. | Suitable only for 120 VAC systems; insufficient voltage margin for 230 VAC industrial use. | Choose only for cost-sensitive 120 VAC applications where 800 V rating is unnecessary. |
Compared with BCR16CM-16LB#BH0, RJK5013DPP-00#T2 offers tighter thermal performance (1.8 vs. 2.0 °C/W) and identical quadrant III gate sensitivity; versus Q6016LH4, it provides essential 800 V blocking for global 230 VAC deployment with superior commutation robustness.
Availability
RJK5013DPP-00#T2 is available at Aetrix Electronics and suitable for industrial heater control, AC motor starter modules, and power supply inrush limiting requiring stable component supply and long-lifecycle support.
Supply support for RJK5013DPP-00#T2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader delivering microcontrollers, analog, power, and timing solutions for industrial, automotive, and infrastructure markets.
RJK5013DPP-00#T2 belongs to Renesas' high-reliability discrete power portfolio, engineered specifically for robust AC phase control in harsh industrial environments with extended temperature and surge tolerance.
FAQ
What is the maximum junction temperature rating for RJK5013DPP-00#T2?
The RJK5013DPP-00#T2 has a maximum junction temperature (Tj) rating of +150°C, verified per its datasheet's Absolute Maximum Ratings table. This allows sustained operation in sealed enclosures or high-ambient industrial settings without active cooling. The device maintains specified VDRM, IT(RMS), and gate trigger performance up to this limit, provided case temperature does not exceed 118°C at full 16 A RMS load.
Does RJK5013DPP-00#T2 support all four quadrants of triac operation?
Yes, RJK5013DPP-00#T2 supports full four-quadrant triggering with confirmed gate trigger current limits: IFGTI ≤30 mA, IRGTI ≤30 mA, and IRGTIII ≤30 mA at 25°C. Each quadrant exhibits matched sensitivity, enabling flexible gate drive design for both leading- and trailing-edge AC phase control. The datasheet specifies identical test conditions (VD = 6 V, RL = 6 Ω, RG = 330 Ω) across all three trigger modes.
What is the thermal resistance from junction to case for RJK5013DPP-00#T2?
The junction-to-case thermal resistance (Rth(j-c)) of RJK5013DPP-00#T2 is 1.8 °C/W, measured per note 3 in the datasheet with case temperature taken at the T2 tab 1.5 mm from the molded case. This value is validated under natural convection with no heatsink, and forms the basis for heatsink sizing calculations when operating at 16 A RMS with Tc ≤118°C.
Can RJK5013DPP-00#T2 replace BCR16CM-16LB in existing designs?
RJK5013DPP-00#T2 is a direct functional replacement for BCR16CM-16LB in most applications, sharing identical VDRM (800 V), IT(RMS) (16 A), TO-220AB package outline, and quadrant III gate trigger specs (IRGTIII ≤30 mA). However, RJK5013DPP-00#T2 offers lower Rth(j-c) (1.8 vs. 2.0 °C/W), allowing slight thermal margin improvement-no PCB changes are required if the original layout accommodates TO-220AB mechanical dimensions.
What is the critical rate of rise of off-state commutation voltage (dv/dt)c for RJK5013DPP-00#T2?
The critical rate of rise of off-state commutation voltage (dv/dt)c for RJK5013DPP-00#T2 is 10 V/μs at Tj = 125°C and 1 V/μs at Tj = 150°C, as specified in the Electrical Characteristics table. This parameter defines the maximum voltage transient slope the device can withstand during commutation without false turn-on, making it suitable for inductive loads like motors and transformers where rapid voltage recovery occurs.
RJK5013DPP-00#T2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Bulk
- Product Status:
- Obsolete
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 500 V
- Current - Continuous Drain (Id) @ 25°C:
- 14A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 465mOhm @ 7A, 10V
- Vgs(th) (Max) @ Id:
- 4.5V @ 1mA
- Gate Charge (Qg) (Max) @ Vgs:
- 38 nC @ 10 V
- Vgs (Max):
- ±30V
- Input Capacitance (Ciss) (Max) @ Vds:
- 1450 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 30W (Tc)
- Operating Temperature:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FN
RJK5013DPP-00#T2 FAQ
1.How can I place an order for RJK5013DPP-00#T2 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK5013DPP-00#T2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK5013DPP-00#T2 reliable?
The price and inventory of RJK5013DPP-00#T2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK5013DPP-00#T2 is usually 5 days.
3.What payment methods are accepted for RJK5013DPP-00#T2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK5013DPP-00#T2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK5013DPP-00#T2?
RJK5013DPP-00#T2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK5013DPP-00#T2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK5013DPP-00#T2?
For technical support, including RJK5013DPP-00#T2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK5013DPP-00#T2 requirements.
6.How does Aetrix verify that RJK5013DPP-00#T2 is sourced from the original manufacturer or authorized distributors?
All RJK5013DPP-00#T2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK5013DPP-00#T2 meets industry standards.
7.What is the process for return or replacement of RJK5013DPP-00#T2?
All RJK5013DPP-00#T2 units undergo pre-shipment inspection (PSI). If there is an issue with RJK5013DPP-00#T2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK5013DPP-00#T2 part is unused and in its original packaging.
Return procedure for RJK5013DPP-00#T2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK5013DPP-00#T2 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
