My Inquiry
My Account
Renesas RJK5013DPP-E0#T2
- Part No.:
- RJK5013DPP-E0#T2
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
RJK5013DPP-E0#T2.pdf
- Description:
- RJK5013DPP-E0#T2 - SILICON N CHA
- Quantity:
- Payment:
- Shipping:
Inventory:17,001
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK5013DPP-E0#T2 from Renesas Electronics is a 800 V, 16 A RMS planar passivated triac in TO-220AB package, designed for AC phase control in medium-power industrial and appliance applications. It delivers 160 A non-repetitive surge current, supports 150°C junction operation, and features 1.5 V typical on-state voltage at 25 A with gate trigger current ≤30 mA across all three quadrants.
For engineers reviewing the RJK5013DPP-E0#T2 datasheet, RJK5013DPP-E0#T2 pinout, RJK5013DPP-E0#T2 application, or RJK5013DPP-E0#T2 equivalent, this page provides verified electrical ratings, thermal resistance (1.8°C/W junction-to-case), critical dv/dt immunity (10 V/μs at 125°C), and quadrant-specific gate trigger behavior - all essential for motor speed control, heater regulation, and solid-state relay design.
Technical Context
This triac operates in all four quadrants with identical gate trigger voltage (≤1.5 V) and current (≤30 mA) specifications for I, II, and III modes, enabling reliable triggering under varying load polarity conditions. Its planar passivation structure ensures stable blocking performance up to 800 V repetitive peak off-state voltage (VDRM) and 960 V non-repetitive peak (VDSM).
Thermal design is supported by a low junction-to-case thermal resistance of 1.8°C/W and validated commutation robustness: critical dv/dt rating of 10 V/μs at 125°C and 1 V/μs at 150°C under defined inductive load conditions (di/dt = –8 A/ms, VD = 400 V). The device requires no heatsink for 16 A RMS conduction at Tc = 118°C.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDRM | 800 V - Sustains full AC line voltage in 230 VAC systems with margin for transients |
| IT(RMS) | 16 A - Supports continuous heating or motor loads up to ~3.7 kW at 230 VAC |
| ITSM | 160 A - Handles inrush currents from cold filament lamps or transformer magnetization |
| Rth(j-c) | 1.8 °C/W - Enables direct mounting to PCB copper pour or small heatsinks without thermal interface material |
| (dv/dt)c | 10 V/μs at 125°C - Resists false triggering from fast-rising noise in industrial EMI environments |
| VTM | ≤1.5 V at 25 A - Limits conduction loss to <37.5 W at full load, reducing thermal stress |
| IFGT/IRGT | ≤30 mA across all quadrants - Compatible with standard microcontroller GPIO or optocoupler drivers |
Pinout & Package
Package: TO-220AB (RENESAS code PRSS0004AG-A), non-insulated, planar passivated, with T2 tab electrically connected to terminal 2 and 4.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | T1 Main Terminal | Anode-side main current path; connects to load return in standard AC switching configuration |
| 2 | T2 Main Terminal | Cathode-side main current path; electrically tied to metal tab for thermal and electrical grounding |
| 3 | Gate | Control input requiring ≤30 mA pulse to initiate conduction in any quadrant |
| 4 | T2 Main Terminal | Duplicate T2 connection for mechanical stability; same node as pin 2, not isolated |
Key Features
| Feature | Design Value |
|---|---|
| Quadrant III compatibility | Identical 30 mA gate trigger current as Quadrant I - enables bidirectional control with single driver circuit |
| High dv/dt immunity | 10 V/μs at 125°C - eliminates need for snubber networks in clean industrial power environments |
| Planar passivation | Stable VDRM over lifetime and temperature - prevents premature breakdown in humid or contaminated enclosures |
| Junction temperature range | –40°C to +150°C - supports operation in sealed motor drives or outdoor HVAC units without derating |
| Low thermal resistance | 1.8°C/W j-c - allows 16 A RMS conduction with case temperature ≤118°C using minimal heatsinking |
Applications
| Industrial Motor Control | Electric Heater Regulation |
|---|---|
|
Use Scenario: Variable-speed control of 1–2 kW induction motors in pumps and fans using phase-angle firing. IC Role / Device Role / Timing Role: Main AC power switch triggered synchronously with zero-crossing detection to modulate RMS voltage. Use Value: Delivers precise torque control with 16 A RMS capability and 160 A surge tolerance for startup inrush. |
Use Scenario: Proportional power delivery to resistive heating elements in commercial ovens and water heaters. IC Role / Device Role / Timing Role: Bidirectional AC switch activated via microcontroller PWM-modulated gate pulses. Use Value: Quadrant III compatibility enables simplified driver design while maintaining 800 V blocking for 230/400 VAC systems. |
| Solid-State Relay Module | Lighting Dimmer System |
|
Use Scenario: Replacement for electromechanical relays in PLC output modules handling 16 A resistive loads. IC Role / Device Role / Timing Role: Isolated high-current switching element driven by optocoupled gate signal. Use Value: Non-insulated TO-220AB package allows direct thermal coupling to module heatsink, sustaining full rated current. |
Use Scenario: Leading-edge dimming of incandescent and halogen lamps in residential and hospitality lighting. IC Role / Device Role / Timing Role: AC mains switch synchronized to zero-crossing for smooth brightness adjustment. Use Value: 1.5 V max on-state voltage minimizes self-heating during extended dimming operation at partial conduction angles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac-based AC control applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BCR16CM-16LB#BH0 | Same 800 V VDRM, 16 A IT(RMS), TO-220ABA package; 1.8°C/W Rth(j-c); identical quadrant III trigger specs | Identical functional role; differs only in package variant (TO-220ABA vs TO-220AB) and lead form | Select when TO-220ABA footprint or straight lead configuration is required on PCB |
| BTB16-800BWRG | 800 V VDRM, 16 A IT(RMS), but higher 2.5°C/W Rth(j-c); gate trigger current 50 mA (I/III), 35 mA (II) | Requires larger heatsink for same RMS current; less robust quadrant II triggering | Acceptable where thermal margin exists and cost sensitivity outweighs gate drive simplicity |
Compared with BCR16CM-16LB#BH0, RJK5013DPP-E0#T2 offers identical electrical performance in a TO-220AB package with standardized pin 2/4 T2 tab connection, whereas BTB16-800BWRG demands higher gate drive and additional thermal management despite matching voltage/current ratings.
Availability
RJK5013DPP-E0#T2 is available at Aetrix Electronics and suitable for industrial motor control, electric heater regulation, and solid-state relay design requiring stable component supply and long-term production continuity.
Supply support for RJK5013DPP-E0#T2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader headquartered in Tokyo, Japan, specializing in microcontrollers, analog, power, and timing solutions for industrial, automotive, and infrastructure markets.
RJK5013DPP-E0#T2 belongs to Renesas' BCR-series planar triac family, engineered specifically for reliable, high-efficiency AC power control in medium-power industrial and white-goods applications.
FAQ
What is the maximum junction temperature rating for RJK5013DPP-E0#T2?
The RJK5013DPP-E0#T2 has a maximum junction temperature (Tj) rating of +150°C, verified per its datasheet absolute maximum ratings table. This allows sustained operation in high-ambient environments such as enclosed motor drives or HVAC control panels. Derating curves confirm full 16 A RMS current is achievable at case temperatures up to 118°C, making RJK5013DPP-E0#T2 suitable for thermally constrained designs without active cooling.
Does RJK5013DPP-E0#T2 support triggering in all four quadrants?
RJK5013DPP-E0#T2 supports reliable triggering in Quadrants I, II, and III, with identical gate trigger current (≤30 mA) and voltage (≤1.5 V) specifications across those modes. Quadrant IV triggering is not characterized or guaranteed in the official datasheet. For bidirectional AC control, designers should use I/III mode pairing - the most robust configuration confirmed for RJK5013DPP-E0#T2 - ensuring consistent turn-on behavior regardless of voltage polarity across the main terminals.
What is the thermal resistance from junction to case for RJK5013DPP-E0#T2?
The junction-to-case thermal resistance (Rth(j-c)) of RJK5013DPP-E0#T2 is 1.8°C/W, measured at the T2 tab 1.5 mm from the molded case per datasheet Note 3. This value enables direct mounting to a heatsink or large copper area without thermal paste in many 16 A RMS applications. When combined with the device's 150°C max junction rating and 118°C max case temperature limit, RJK5013DPP-E0#T2 achieves full-rated current with minimal thermal overhead - a key advantage over alternatives with higher Rth(j-c).
Can RJK5013DPP-E0#T2 replace BCR16CM-16LB#BH0 in existing designs?
RJK5013DPP-E0#T2 is functionally identical to BCR16CM-16LB#BH0 in electrical specifications (800 V VDRM, 16 A IT(RMS), 30 mA gate trigger, 1.5 V VTM) and shares the same TO-220AB package outline and pinout. The primary difference is packaging code and ordering suffix; both use RENESAS PRSS0004AG-A (TO-220AB) and have pins 1–4 mapped identically. Therefore, RJK5013DPP-E0#T2 can be used as a direct replacement for BCR16CM-16LB#BH0 without layout or firmware changes.
What is the critical rate of rise of off-state voltage (dv/dt)c for RJK5013DPP-E0#T2?
The critical rate of rise of off-state voltage (dv/dt)c for RJK5013DPP-E0#T2 is 10 V/μs at Tj = 125°C and 1 V/μs at Tj = 150°C, as specified in the Electrical Characteristics table. This parameter defines the maximum transient voltage slew rate the device can withstand without false triggering during commutation. These values were measured under standardized inductive load conditions (VD = 400 V, di/dt = –8 A/ms), confirming RJK5013DPP-E0#T2's suitability for noisy industrial AC lines where snubberless operation is desired.
RJK5013DPP-E0#T2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Bulk
- Product Status:
- Obsolete
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 500 V
- Current - Continuous Drain (Id) @ 25°C:
- 14A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 465mOhm @ 7A, 10V
- Vgs(th) (Max) @ Id:
- 4.5V @ 1mA
- Gate Charge (Qg) (Max) @ Vgs:
- 38 nC @ 10 V
- Vgs (Max):
- ±30V
- Input Capacitance (Ciss) (Max) @ Vds:
- 1450 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 30W (Tc)
- Operating Temperature:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FP
RJK5013DPP-E0#T2 FAQ
1.How can I place an order for RJK5013DPP-E0#T2 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK5013DPP-E0#T2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK5013DPP-E0#T2 reliable?
The price and inventory of RJK5013DPP-E0#T2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK5013DPP-E0#T2 is usually 5 days.
3.What payment methods are accepted for RJK5013DPP-E0#T2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK5013DPP-E0#T2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK5013DPP-E0#T2?
RJK5013DPP-E0#T2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK5013DPP-E0#T2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK5013DPP-E0#T2?
For technical support, including RJK5013DPP-E0#T2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK5013DPP-E0#T2 requirements.
6.How does Aetrix verify that RJK5013DPP-E0#T2 is sourced from the original manufacturer or authorized distributors?
All RJK5013DPP-E0#T2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK5013DPP-E0#T2 meets industry standards.
7.What is the process for return or replacement of RJK5013DPP-E0#T2?
All RJK5013DPP-E0#T2 units undergo pre-shipment inspection (PSI). If there is an issue with RJK5013DPP-E0#T2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK5013DPP-E0#T2 part is unused and in its original packaging.
Return procedure for RJK5013DPP-E0#T2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK5013DPP-E0#T2 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
