My Inquiry
My Account
Renesas RJK5014DPP-00#T2
- Part No.:
- RJK5014DPP-00#T2
- Manufacturer:
- Renesas
- Category:
- FETs, MOSFETs
- Package:
- -
- Datasheet:
-
RJK5014DPP-00#T2.pdf
- Description:
- N-CHANNEL POWER MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:3,328
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJK5014DPP-00#T2 from Renesas is a silicon N-channel power MOSFET designed for high-speed switching in offline AC-DC power supplies and motor drive inverters, featuring 500 V VDSS, 0.325 Ω RDS(on) at 10 V VGS, 19 A continuous drain current, and TO-220FN package with isolated tab for enhanced thermal management.
For engineers reviewing the RJK5014DPP-00#T2 datasheet, RJK5014DPP-00#T2 pinout, RJK5014DPP-00#T2 application, or RJK5014DPP-00#T2 equivalent, key selection criteria include avalanche energy rating (0.88 mJ), body-diode reverse recovery time (320 ns), gate charge (46 nC), and maximum channel temperature (150 °C) under high-duty-cycle operation.
Technical Context
This MOSFET employs planar vertical DMOS architecture optimized for ruggedness in hard-switched topologies. Its 500 V breakdown voltage supports universal-input 85–265 VAC front-end designs, while low Ciss (1800 pF) and Crss (24 pF) enable fast turn-on/turn-off with minimal Miller-induced oscillation risk.
The device integrates a co-packaged body diode with 0.91 V forward voltage at 19 A and 320 ns reverse recovery time-critical for reducing switching losses in flyback and LLC resonant converters where synchronous rectification is not used.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 500 V - Withstands full rectified 375 VDC bus in universal-input SMPS without avalanche conduction |
| RDS(on) | 0.325 Ω typ. - Enables ≤1.8 W conduction loss at 9.5 A, supporting compact heatsink design |
| ID | 19 A - Continuous current rating at Tc = 25 °C, derated to ~12 A at Tc = 100 °C |
| Qg | 46 nC - Determines gate driver power requirement; compatible with standard 1-A peak drivers |
| tr/tf | 41 ns / 39 ns - Supports >200 kHz switching in hard-switched PFC and DC-DC stages |
| EAR | 0.88 mJ - Sustains single-pulse inductive load energy without failure in relay/snubberless designs |
| θch-c | 3.57 °C/W - Enables direct mounting to heatsink with thermal interface material for stable Tch control |
Pinout & Package
Package: TO-220FN (RENESAS code PRSS0003AB-A), thermally enhanced variant with electrically isolated drain tab for simplified heatsinking and reduced creepage requirements.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Receives 10 V logic-level signal to fully enhance channel; requires <10 Ω series resistance to suppress ringing |
| 2 (Drain) | High-side power terminal | Connected to primary-side high-voltage rail; tab is electrically tied to Drain and serves as thermal path |
| 3 (Source) | Power return / reference node | Serves as local ground reference for gate drive; must be routed with low-inductance layout to minimize dV/dt coupling |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(on) at 10 V VGS | 0.325 Ω typ. reduces conduction loss in high-current output stages of industrial PSUs |
| Fast switching with low Qgd/Qgs ratio | 20 nC / 9 nC ratio minimizes Miller plateau duration, improving EMI profile in noise-sensitive applications |
| Rugged avalanche capability | Rated 4 A IAP and 0.88 mJ EAR enables reliable operation in unclamped inductive switching |
| Body diode with controlled trr | 320 ns reverse recovery time limits voltage overshoot during commutation in half-bridge configurations |
| Isolated TO-220FN package | Drain-tab isolation eliminates need for insulating washer, simplifying mechanical assembly and thermal interface |
Applications
| Industrial AC-DC Power Supplies | Motor Drive Inverters |
|---|---|
Use Scenario: Primary-side switch in 150–300 W universal-input offline flyback converters powering PLC I/O modules. IC Role / Device Role / Timing Role: High-voltage power switch controlling energy transfer during each PWM cycle; operates at 65–130 kHz. Use Value: Low RDS(on) and fast tr/tf reduce total switching + conduction losses to <2.5 W, enabling natural convection cooling. | Use Scenario: Upper-leg switch in 3-phase inverter driving 0.5–1 kW permanent magnet motors in HVAC blowers. IC Role / Device Role / Timing Role: High-side power switch in hard-switched 6–12 kHz inverter leg; handles repetitive inductive turn-off stress. Use Value: Avalanche-rated operation ensures reliability during motor stall events without external snubbers. |
| LED Driver Ballasts | UPS DC-Link Switching |
Use Scenario: Main switch in constant-current buck-boost LED driver for street lighting operating from 277 VAC line. IC Role / Device Role / Timing Role: Regulated power switch modulating average LED current via PWM dimming at 1–20 kHz. Use Value: 500 V VDSS accommodates 400 VDC bus transients; low leakage (<1 μA) prevents standby current drift. | Use Scenario: Bidirectional DC-link switch in online double-conversion UPS systems managing battery charging and inverter feed. IC Role / Device Role / Timing Role: High-reliability power switch handling 400 VDC bus with frequent polarity reversal during mode transitions. Use Value: Isolated TO-220FN package allows direct heatsink mounting without insulation layers, reducing thermal resistance by 1.2 °C/W. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage N-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP19NM50FP | Higher RDS(on) (0.36 Ω), lower Qg (35 nC), same 500 V rating and TO-220FP package | Lower gate drive demand but higher conduction loss; no isolated tab - requires insulating pad | Select when gate drive power budget is constrained and heatsink isolation is already implemented |
| IXFH18N50P | Higher RDS(on) (0.38 Ω), higher avalanche energy (1.2 mJ), TO-247 package with larger thermal mass | Better ruggedness margin for high-energy fault conditions; larger footprint and cost | Select when system-level fault testing requires >1 mJ single-pulse avalanche capability |
Compared with STP19NM50FP and IXFH18N50P, the RJK5014DPP-00#T2 delivers lowest conduction loss in TO-220FN form factor with integrated thermal isolation-ideal for space-constrained, high-efficiency industrial power stages where board area and thermal interface simplicity are critical.
Availability
RJK5014DPP-00#T2 is available at Aetrix Electronics and suitable for industrial AC-DC power supplies, motor drive inverters, and LED driver ballasts requiring stable component supply across multi-year production cycles.
Supply support for RJK5014DPP-00#T2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader delivering microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT applications with emphasis on functional safety and long-term supply stability.
The RJK5014DPP-00#T2 belongs to Renesas' high-voltage power MOSFET family engineered specifically for rugged, high-efficiency offline switching in industrial-grade power conversion systems.
FAQ
What is the maximum continuous drain current rating for RJK5014DPP-00#T2 at 100 °C case temperature?
The RJK5014DPP-00#T2 has a continuous drain current rating of 19 A at Tc = 25 °C. At Tc = 100 °C, the current must be derated using the SOA curve on page 3 of the datasheet; typical usable ID is approximately 12 A under sustained thermal conditions, confirmed by the maximum safe operation area limit and θch-c = 3.57 °C/W specification. The RJK5014DPP-00#T2 datasheet provides exact derating curves for precise thermal design.
Does RJK5014DPP-00#T2 have an isolated drain tab, and how does it affect PCB layout?
Yes, the RJK5014DPP-00#T2 uses the TO-220FN package with an electrically isolated drain tab, meaning the metal tab is connected only to the Drain terminal and not internally shorted to Source or Gate. This eliminates the need for insulating washers or pads, simplifies heatsink mounting, and improves creepage distance in high-voltage designs. The RJK5014DPP-00#T2's isolated tab directly supports compliance with IEC 62368-1 reinforced insulation requirements.
What is the typical gate-to-source threshold voltage range for RJK5014DPP-00#T2, and how does it impact drive circuit design?
The RJK5014DPP-00#T2 has a VGS(off) range of 3.0–4.5 V, indicating the gate voltage at which the device transitions from off to on state. This threshold ensures reliable turn-on with standard 10 V gate drivers while maintaining low IDSS leakage at 0 V. For robust operation, the RJK5014DPP-00#T2 requires ≥10 V VGS to achieve its specified 0.325 Ω RDS(on), and gate drive circuits must deliver sufficient peak current to charge 46 nC within nanoseconds.
Can RJK5014DPP-00#T2 be used in avalanche-mode operation, and what are the limits?
Yes, the RJK5014DPP-00#T2 is rated for single-pulse avalanche operation with IAP = 4 A and EAR = 0.88 mJ at Tch ≤ 150 °C. It is not rated for repetitive avalanche. Designers must ensure that all inductive energy dissipation remains within this single-pulse limit, verified using the SOA graph on page 3. The RJK5014DPP-00#T2's avalanche capability supports snubberless relay driving and fault-tolerant PFC stage designs.
How does the body diode performance of RJK5014DPP-00#T2 compare to standard FRDs in flyback applications?
The RJK5014DPP-00#T2 body diode has VDF = 0.91 V at 19 A and trr = 320 ns, offering lower forward drop than many discrete FRDs but slower recovery than ultrafast types. In flyback converters operating below 100 kHz, this diode enables acceptable efficiency without external rectifiers. However, for >150 kHz designs, the RJK5014DPP-00#T2's body diode may require soft-switching techniques or synchronous rectification to avoid excessive loss.
RJK5014DPP-00#T2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- FET Type:
- -
- Technology:
- -
- Drain to Source Voltage (Vdss):
- -
- Current - Continuous Drain (Id) @ 25°C:
- -
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- -
- Vgs(th) (Max) @ Id:
- -
- Gate Charge (Qg) (Max) @ Vgs:
- -
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- -
- FET Feature:
- -
- Power Dissipation (Max):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
RJK5014DPP-00#T2 FAQ
1.How can I place an order for RJK5014DPP-00#T2 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJK5014DPP-00#T2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJK5014DPP-00#T2 reliable?
The price and inventory of RJK5014DPP-00#T2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJK5014DPP-00#T2 is usually 5 days.
3.What payment methods are accepted for RJK5014DPP-00#T2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJK5014DPP-00#T2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJK5014DPP-00#T2?
RJK5014DPP-00#T2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJK5014DPP-00#T2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJK5014DPP-00#T2?
For technical support, including RJK5014DPP-00#T2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJK5014DPP-00#T2 requirements.
6.How does Aetrix verify that RJK5014DPP-00#T2 is sourced from the original manufacturer or authorized distributors?
All RJK5014DPP-00#T2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJK5014DPP-00#T2 meets industry standards.
7.What is the process for return or replacement of RJK5014DPP-00#T2?
All RJK5014DPP-00#T2 units undergo pre-shipment inspection (PSI). If there is an issue with RJK5014DPP-00#T2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJK5014DPP-00#T2 part is unused and in its original packaging.
Return procedure for RJK5014DPP-00#T2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJK5014DPP-00#T2 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
