My Inquiry
My Account
Diodes Incorporated ZVP3310FTC
- Part No.:
- ZVP3310FTC
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
ZVP3310FTC.pdf
- Description:
- MOSFET P-CH 100V 75MA SOT23-3
- Quantity:
- Payment:
- Shipping:
Inventory:8,641
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZVP3310FTC from Diodes Incorporated is a P-channel enhancement-mode vertical DMOS FET in SOT23 package, rated for -100V VDSS, 20Ω RDS(ON) @ VGS = -10V, and -75mA continuous drain current. It serves as a low-power load switch in space-constrained DC-DC bias rails and battery protection circuits where low leakage and fast switching are critical.
For engineers reviewing the ZVP3310FTC datasheet, ZVP3310FTC pinout, ZVP3310FTC application, or ZVP3310FTC equivalent, key selection criteria include verified -100V blocking capability, sub-1μA IDSS at -100V, 50pF Ciss for gate drive efficiency, and SOT23 thermal resistance (RθJA ≈ 379°C/W) in low-duty-cycle switching.
Technical Context
This MOSFET employs vertical DMOS architecture to achieve high breakdown voltage in a miniature surface-mount package. Its -1.5V to -3.5V gate threshold enables direct logic-level control from 3.3V/5V microcontrollers without level shifting.
Designed for enhancement-mode operation, it remains fully off until sufficient negative gate bias is applied. The device exhibits low input capacitance (Ciss = 50pF) and symmetric turn-on/turn-off timing (tD(ON)/tR/tD(OFF)/tF ≤ 8ns each), supporting clean edge transitions in pulsed load control.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -100V - supports input rails up to -80V with 20% safety margin in industrial bias supplies |
| RDS(ON) | 20Ω max @ VGS = -10V - limits conduction loss to <0.23mW at -150mA ID |
| ID cont. | -75mA - suitable for low-current enable paths in PMICs and sensor bias networks |
| Ciss | 50pF - reduces gate drive power and enables use with weak MCU GPIOs |
| IDSS | <-1μA @ VDS = -100V - ensures minimal standby leakage in always-on battery monitoring |
| tD(ON) | ≤8ns - allows sub-100ns total switching cycle for burst-mode sequencing |
| PD | 330mW @ TA = +25°C - requires derating above 65°C ambient in enclosed enclosures |
Pinout & Package
Package: SOT23 - 3-pin, surface-mount plastic case with matte tin-plated copper leadframe; UL 94V-0 rated, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Drain) | High-side switched output node | Connected to negative supply rail; carries full load current when on |
| Pin 2 (Gate) | Control input | Accepts negative logic signal; threshold range (-1.5V to -3.5V) enables direct MCU interface |
| Pin 3 (Source) | Reference terminal | Biased to system ground or higher potential; defines VGS reference for turn-on |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(ON) | 20Ω max at -10V gate drive enables efficient switching in <100mA load paths |
| Low Ciss | 50pF minimizes gate charge (Qg ≈ 1.5nC estimated) for low-drive-strength controllers |
| Fast switching | ≤8ns propagation and transition times support >10MHz pulse control in sequencing circuits |
| Ultra-low leakage | <-1μA IDSS at -100V ensures stable bias in long-duration sleep modes |
| Green packaging | Halogen- and antimony-free, RoHS 3 compliant with <900ppm Br/Cl and <1000ppm Sb |
Applications
| Industrial Sensor Biasing | USB Port Power Control |
|---|---|
Use Scenario: Providing regulated negative bias to MEMS pressure sensors in factory automation nodes. IC Role / Device Role / Timing Role: High-side load switch enabling/disabling sensor supply during measurement cycles. Use Value: Sub-1μA leakage preserves battery life over multi-year deployments; -100V rating accommodates transients on shared 24V bus lines. | Use Scenario: Controlling VBUS power delivery to downstream USB peripherals in embedded hosts. IC Role / Device Role / Timing Role: Reverse-polarity protection and hot-swap enable switch in USB Type-A host ports. Use Value: Fast 8ns turn-off prevents glitch-induced enumeration failures during plug/unplug events. |
| Medical Wearable Battery Monitoring | Automotive Body Control Module |
Use Scenario: Isolating battery voltage sense circuitry from main power rail during sleep mode. IC Role / Device Role / Timing Role: Low-leakage enable gate for precision ADC reference dividers. Use Value: -1μA IDSS avoids measurement offset drift in sub-μA quiescent current designs. | Use Scenario: Switching auxiliary 12V loads (e.g., interior lighting, mirror heaters) in BCM sub-modules. IC Role / Device Role / Timing Role: Logic-controlled high-side switch replacing mechanical relays. Use Value: 20Ω RDS(ON) limits self-heating to <0.2°C/W in intermittent 50mA duty-cycle loads. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ZVP2106A | VDSS = -60V, RDS(ON) = 10Ω @ -10V, ID = -200mA | Lower voltage rating; higher current capacity | Select when operating below -60V and requiring lower conduction loss at >100mA |
| DMN2053U | VDSS = -20V, RDS(ON) = 3.5Ω @ -4.5V, ID = -3.8A | Logic-level gate, much higher current, lower voltage | Choose for 3.3V MCU direct drive and >1A loads; not suitable for -100V systems |
Compared with ZVP3310FTC, ZVP2106A trades voltage headroom for lower RDS(ON) and higher current, while DMN2053U sacrifices breakdown rating for logic-level compatibility and high-current capability-neither replicates the -100V/low-leakage niche of ZVP3310FTC.
Availability
ZVP3310FTC is available at Aetrix Electronics and suitable for industrial sensor biasing, USB port power control, and medical wearable battery monitoring requiring stable component supply across extended production lifecycles.
Supply support for ZVP3310FTC includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design and manufacturing operations across Asia and the Americas.
ZVP3310FTC belongs to Diodes' vertical DMOS FET product line, engineered specifically for high-voltage, low-current load switching in space-constrained portable and industrial systems.
FAQ
What is the maximum safe gate-source voltage for ZVP3310FTC?
The absolute maximum VGS is ±20V per the datasheet. Operation beyond ±15V risks permanent gate oxide damage. For reliable logic-level control, apply -10V to ensure full enhancement while maintaining 5V margin below the limit.
Can ZVP3310FTC be used in linear (analog) regulation mode?
No-it is optimized for switching operation only. Its RDS(ON) variation over temperature and lack of SOA curves make it unsuitable for linear pass applications. Use dedicated LDOs or bipolar regulators instead.
Is ZVP3310FTC pin-compatible with ZVP3310F?
Yes-ZVP3310FTC uses the same SOT23 package and identical pinout (Drain-Gate-Source). The "TC" suffix denotes tape-and-reel packaging per Diodes' ordering convention; electrical and thermal specs are identical to ZVP3310F.
Does ZVP3310FTC meet automotive qualification standards?
No-the standard ZVP3310FTC is not AEC-Q101 qualified. Diodes offers the automotive-grade ZVP3310FQ variant, which undergoes additional stress testing and has tighter parametric limits for under-hood applications.
ZVP3310FTC Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 100 V
- Current - Continuous Drain (Id) @ 25°C:
- 75mA (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 20Ohm @ 150mA, 10V
- Vgs(th) (Max) @ Id:
- 3.5V @ 1mA
- Gate Charge (Qg) (Max) @ Vgs:
- -
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 50 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 330mW (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-3
ZVP3310FTC FAQ
1.How can I place an order for ZVP3310FTC through Aetrix?
Please submit a Request for Quotation (RFQ) for ZVP3310FTC on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZVP3310FTC reliable?
The price and inventory of ZVP3310FTC are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZVP3310FTC is usually 5 days.
3.What payment methods are accepted for ZVP3310FTC?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZVP3310FTC transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZVP3310FTC?
ZVP3310FTC orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZVP3310FTC order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZVP3310FTC?
For technical support, including ZVP3310FTC datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZVP3310FTC requirements.
6.How does Aetrix verify that ZVP3310FTC is sourced from the original manufacturer or authorized distributors?
All ZVP3310FTC products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZVP3310FTC meets industry standards.
7.What is the process for return or replacement of ZVP3310FTC?
All ZVP3310FTC units undergo pre-shipment inspection (PSI). If there is an issue with ZVP3310FTC, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZVP3310FTC part is unused and in its original packaging.
Return procedure for ZVP3310FTC:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZVP3310FTC Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
