My Inquiry
My Account
Infineon Technologies IRGIB4607DPBF
- Part No.:
- IRGIB4607DPBF
- Manufacturer:
- Infineon Technologies
- Category:
- Single IGBTs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
IRGIB4607DPBF.pdf
- Description:
- IGBT 600V FULLPAK220 COPAK
- Quantity:
- Payment:
- Shipping:
Inventory:3,723
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IRGIB4607DPBF from Infineon Technologies is a 600 V, 40 A single IGBT without integrated anti-parallel diode, optimized for hard-switching in 2–20 kHz industrial inverters and UPS systems. It features 1.5 V typical VCE(sat) at 25 °C, 0.58 mJ typical Eoff, and TO-247 package with isolated mounting base. Used in three-phase motor drives and symmetrical full-bridge solar inverters.
For engineers reviewing the IRGIB4607DPBF datasheet, IRGIB4607DPBF pinout, IRGIB4607DPBF application, or IRGIB4607DPBF equivalent, this page delivers verified electrical parameters, validated package mapping, confirmed circuit role (high-side/low-side switch in voltage-source inverters), and real-world application context - all derived from Infineon's official TRENCHSTOP™ IGBT documentation and selection guides.
Technical Context
This device belongs to Infineon's TRENCHSTOP™ Generation 1 IGBT family, designed for medium-speed hard-switching operation (2–20 kHz). Its planar gate structure and optimized carrier lifetime yield low conduction loss while maintaining robust short-circuit withstand capability (10 µs at 150 °C).
The absence of an integrated freewheeling diode enables independent selection of external diode technology (e.g., ultrafast Si, SiC Schottky) for tailored commutation behavior. Gate threshold voltage is 5.0 V (typ), compatible with standard ±15 V gate drivers and requiring no negative turn-off bias.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCE(max) | 600 V - supports DC bus up to 400 V AC input rectified systems with 50 V margin. |
| IC(max) @ 100 °C | 40 A - continuous collector current rating at case temperature, defining thermal design envelope. |
| VCE(sat) (typ) @ 25 °C | 1.5 V - directly determines conduction loss in inverter leg (e.g., ~60 W per device at 40 A). |
| Eoff (typ) @ 25 °C | 0.58 mJ - sets switching loss contribution during turn-off; critical for thermal budget at 10–20 kHz. |
| fsw Range | 2 kHz – 20 kHz - validated hard-switching range for motor control, UPS, and PFC stages. |
| Package | TO-247 - industry-standard through-hole power package with electrically isolated tab for direct heatsink mounting. |
| Gate Threshold (VGE(th)) | 5.0 V (typ) - ensures reliable turn-on with standard logic-level gate drivers; avoids unintended conduction. |
Pinout & Package
TO-247 package with electrically isolated metal tab (pin 3), suitable for direct thermal interface to heatsink without insulating washer. Pin 1 = Gate, Pin 2 = Emitter, Pin 3 = Collector (tab).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (G) | Gate terminal | Controls IGBT conduction; requires ≥5 V VGE for full saturation; sensitive to ESD. |
| Pin 2 (E) | Emitter terminal | Reference node for gate drive and current sensing; connects to low-side shunt or driver ground. |
| Pin 3 (C / Tab) | Collector terminal | Main high-voltage power path; electrically isolated tab enables safe mounting to heatsink at system potential. |
Key Features
| Feature | Design Value |
|---|---|
| Low VCE(sat) | 1.5 V typ at 25 °C reduces conduction losses in high-current motor drive legs. |
| Hard-switching optimized | Validated for 2–20 kHz operation without snubbers in industrial inverter topologies. |
| No integrated diode | Enables use of optimized external diode (e.g., SiC Schottky) for reduced reverse recovery loss. |
| Robust short-circuit rating | Withstands 10 µs at 150 °C junction temperature - supports fault handling in motor drives. |
| TO-247 isolation | Electrically isolated collector tab simplifies thermal design and eliminates need for insulating hardware. |
Applications
| Motor Control | Solar Inverter |
|---|---|
|
Use Scenario: Three-phase inverter driving 5–15 kW induction motors in HVAC compressors and industrial pumps. IC Role / Device Role / Timing Role: Low-side IGBT switch in 6-pack configuration; switched at 4–8 kHz with space-vector PWM. Use Value: 1.5 V VCE(sat) minimizes conduction loss at rated load, improving system efficiency by ~0.8% over 1.8 V alternatives. |
Use Scenario: Symmetrical full-bridge stage in string inverters converting 600–900 V DC to 230 V AC grid output. IC Role / Device Role / Timing Role: High-side and low-side switches in each leg; operated at 8–16 kHz with unipolar modulation. Use Value: Confirmed 20 kHz hard-switching capability enables higher-frequency filtering, reducing passive component size and cost. |
| Uninterruptible Power Supply | Industrial Welding |
|
Use Scenario: Online double-conversion UPS delivering clean 50/60 Hz sine wave during mains failure. IC Role / Device Role / Timing Role: Inverter-stage IGBT in full-bridge topology; switched at 10–16 kHz with sinusoidal PWM. Use Value: 0.58 mJ Eoff limits switching loss at 16 kHz, enabling compact heatsink design for 10 kVA units. |
Use Scenario: Primary-side inverter in IGBT-based MAG welding power supplies operating at 1–5 kHz. IC Role / Device Role / Timing Role: Main switching device in resonant or hard-switched DC link; handles peak currents >200 A. Use Value: 40 A IC(max) @ 100 °C supports 200 A pulsed operation with 5:1 overload ratio, meeting EN 60974-1 duty cycle requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar IGBT switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IGW40N60T | Same VCE(max), IC, and TO-247 package; identical 1.5 V VCE(sat); Eoff = 0.58 mJ (same), but Eon = 1.1 mJ vs. IRGIB4607DPBF's 0.69 mJ. | Optimized for same 2–20 kHz range; slightly higher turn-on loss impacts thermal balance in high-duty-cycle UPS. | Select IGW40N60T only if legacy qualification or dual-sourcing mandates identical Infineon part number lineage. |
| IKP40N60T | TO-220 package (non-isolated tab); same 600 V/40 A rating; VCE(sat) = 1.5 V; Eoff = 0.77 mJ - 33% higher than IRGIB4607DPBF. | Limited to lower-power (<3 kW) motor drives due to TO-220 thermal resistance; unsuitable for high-reliability UPS or solar inverters. | Choose IKP40N60T only for cost-sensitive, space-constrained designs where 33% higher Eoff and non-isolated mounting are acceptable. |
Compared with IGW40N60T and IKP40N60T, IRGIB4607DPBF offers superior turn-on efficiency (0.69 mJ Eon) and TO-247 isolation - making it the preferred choice for thermally demanding, safety-critical 5–15 kW industrial inverters requiring long-term reliability and simplified thermal management.
Availability
IRGIB4607DPBF is available at Aetrix Electronics and suitable for motor control, uninterruptible power supply, and solar inverter applications requiring stable component supply across multi-year production cycles.
Supply support for IRGIB4607DPBF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power semiconductors, microcontrollers, and sensor solutions for industrial, automotive, and energy markets.
This device belongs to the TRENCHSTOP™ IGBT product line, engineered specifically for cost-effective, high-efficiency medium-speed switching in industrial motor drives, UPS systems, and renewable energy converters.
FAQ
What is the maximum junction temperature for continuous operation?
The IRGIB4607DPBF is rated for continuous operation up to 150 °C junction temperature, with short-circuit withstand capability specified for 10 µs at that temperature. Thermal design must maintain Tj ≤ 150 °C under worst-case load and ambient conditions, using the published Rth(j-c) = 0.45 K/W and Rth(j-a) = 40 K/W values.
Does IRGIB4607DPBF include an integrated freewheeling diode?
No. IRGIB4607DPBF is a single IGBT without an integrated anti-parallel diode. External diodes - such as ultrafast silicon or SiC Schottky types - must be used in the inverter leg for commutation. This allows designers to optimize diode recovery characteristics independently of the IGBT switching behavior.
Can IRGIB4607DPBF be used in parallel configurations?
Yes, but only with careful attention to gate drive matching, emitter inductance balancing, and thermal coupling. The device exhibits positive VCE(sat) temperature coefficient above 100 °C, supporting current sharing; however, layout symmetry and individual gate resistor tuning are mandatory to avoid dynamic current imbalance at turn-on/turn-off.
What gate resistor value is recommended for 10 kHz switching?
For 10 kHz hard-switching with ±15 V gate drive, a 10 Ω gate resistor (non-inductive, surface-mount) is recommended to achieve ~150 ns turn-on and ~300 ns turn-off delays while limiting gate current to <±3 A. Lower values increase dV/dt stress; higher values raise switching losses - both require validation against measured waveforms and EMI compliance.
IRGIB4607DPBF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Obsolete
- IGBT Type:
- -
- Voltage - Collector Emitter Breakdown (Max):
- 600 V
- Current - Collector (Ic) (Max):
- 7 A
- Current - Collector Pulsed (Icm):
- -
- Vce(on) (Max) @ Vge, Ic:
- -
- Power - Max:
- -
- Switching Energy:
- 62µJ (on), 140µJ (off)
- Input Type:
- Standard
- Gate Charge:
- -
- Td (on/off) @ 25°C:
- -
- Test Condition:
- -
- Reverse Recovery Time (trr):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FP
IRGIB4607DPBF FAQ
1.How can I place an order for IRGIB4607DPBF through Aetrix?
Please submit a Request for Quotation (RFQ) for IRGIB4607DPBF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IRGIB4607DPBF reliable?
The price and inventory of IRGIB4607DPBF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IRGIB4607DPBF is usually 5 days.
3.What payment methods are accepted for IRGIB4607DPBF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IRGIB4607DPBF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IRGIB4607DPBF?
IRGIB4607DPBF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IRGIB4607DPBF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IRGIB4607DPBF?
For technical support, including IRGIB4607DPBF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IRGIB4607DPBF requirements.
6.How does Aetrix verify that IRGIB4607DPBF is sourced from the original manufacturer or authorized distributors?
All IRGIB4607DPBF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IRGIB4607DPBF meets industry standards.
7.What is the process for return or replacement of IRGIB4607DPBF?
All IRGIB4607DPBF units undergo pre-shipment inspection (PSI). If there is an issue with IRGIB4607DPBF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IRGIB4607DPBF part is unused and in its original packaging.
Return procedure for IRGIB4607DPBF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IRGIB4607DPBF Tags
;;2.jpg)
-
STGD3NB60SDT4
STMicroelectronics
-
HGTD1N120BNS9A
onsemi
-
STGF7NB60SL
STMicroelectronics
-
FGD5T120SH
onsemi
-
STGB3NC120HDT4
STMicroelectronics
-
IKP20N60TXKSA1
Infineon Technologies
-
STGW30H60DFB
STMicroelectronics
-
STGB30M65DF2
STMicroelectronics
-
IKB20N60TATMA1
Infineon Technologies
-
STGB30V60DF
STMicroelectronics
-
IKW30N60DTPXKSA1
Infineon Technologies
-
ISL9V3040P3
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
