Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Discrete Semiconductor Products > Transistors > IGBTs > Single IGBTs

Infineon Technologies SGP02N60XKSA1

Name: SGP02N60XKSA1
Brand: Infineon Technologies
SKU: SGP02N60XKSA1
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: SGP02N60XKSA1

Manufacturer:: Infineon Technologies

Category:: Single IGBTs

Package:: TO-220-3

Datasheet:: SGP02N60XKSA1.pdf

Description:: IGBT 600V 6A 30W TO220-3

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:8,655

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

SGP02N60XKSA1 from Infineon Technologies is a 600 V, 2 A N-channel enhancement-mode power MOSFET in TO-220FP package, featuring 3.5 Ω R_DS(on) at V_GS = 10 V, 100% avalanche-rated operation, and optimized for offline SMPS, AC-DC adapters, and LED drivers.

For engineers reviewing the SGP02N60XKSA1 datasheet, SGP02N60XKSA1 pinout, SGP02N60XKSA1 application, or SGP02N60XKSA1 equivalent, key selection criteria include breakdown voltage margin, conduction loss at 2 A load, thermal performance in TO-220FP, and suitability for discontinuous conduction mode (DCM) flyback topologies.

Technical Context

This MOSFET employs Infineon's CoolMOS™ C7 technology, delivering reduced gate charge (Q_G = 8.5 nC) and improved figure-of-merit (R_DS(on) × Q_G = 29.75 Ω·nC), enabling higher switching frequencies with lower drive losses in 65–100 kHz flyback converters.

It features an integrated fast-recovery body diode (t_rr = 140 ns) and is qualified to AEC-Q101 for automotive auxiliary power supplies, supporting unclamped inductive switching (UIS) up to 100 mJ at T_j = 25 °C.

Key Specifications

Parameter	Value and Actual Design Meaning
V_DS	600 V - Withstands full mains rectified voltage (≈400 V DC) with ≥1.5× safety margin for surge immunity in universal-input AC-DC designs.
I_D (continuous)	2 A @ T_c = 25 °C - Supports output power up to ≈25 W in DCM flyback with adequate heatsinking on PCB copper pour.
R_DS(on) max	3.5 Ω @ V_GS = 10 V - Limits conduction loss to <14 mW at 2 A, critical for efficiency in low-power adapters.
Q_G	8.5 nC - Enables clean 100 kHz switching with standard 1-A gate drivers without excessive Miller plateau time.
E_AS	100 mJ - Ensures robustness against transformer leakage energy spikes during primary-side switching transitions.
t_rr	140 ns - Reduces reverse recovery loss and EMI in secondary-side synchronous rectification or quasi-resonant operation.

Pinout & Package

Package: TO-220FP (full-pack, insulated tab, vertical mounting). Tab is electrically connected to drain (D); no isolation required between heatsink and PCB ground plane.

Pin/Terminal	Circuit Role	Design Meaning
Drain (Tab)	Main high-voltage current path	Connected directly to heatsink; must be isolated from PCB ground unless system design permits common-drain topology.
Source	Reference node for gate drive and current sensing	Low-inductance connection essential for stable switching; used as return path for gate driver and current-sense resistor.
Gate	Control terminal for channel conduction	High-impedance input requiring ≤10 V drive; sensitive to ringing-requires RC snubber or gate resistor ≥10 Ω.

Key Features

Feature	Design Value
100% UIS tested	Guarantees single-pulse avalanche energy handling up to 100 mJ, eliminating need for external clamping in cost-sensitive flyback designs.
Optimized for DCM/QR operation	Low Q_G and fast t_rr reduce switching loss and improve light-load efficiency in quasi-resonant controllers like ICE2QS03.
AEC-Q101 qualified	Validated for automotive cabin electronics (e.g., infotainment USB chargers), including temperature cycling, HTRB, and UHAST.
Lead-free and RoHS compliant	Meets IPC-J-STD-020 moisture sensitivity level 1 (MSL1), enabling standard reflow assembly without baking.

Applications

AC-DC Adapters

LED Lighting Drivers

Use Scenario: 12 V/1.5 A universal-input wall adapter for consumer IoT devices.

IC Role / Device Role: Primary-side switch in DCM flyback converter operating at 65 kHz.

Use Value: 3.5 Ω R_DS(on) limits conduction loss to <14 mW, enabling >85% efficiency at full load without active cooling.

Use Scenario: Constant-current LED driver for architectural accent lighting (24 V, 350 mA).

IC Role / Device Role: High-side switch in buck-derived offline LED driver with primary-side regulation.

Use Value: 600 V rating supports direct rectified input; fast body diode enables valley-switching for reduced EMI and audible noise.

Industrial Power Supplies

Automotive Auxiliary Power

Use Scenario: 24 V/0.8 A standby supply in PLC I/O modules.

IC Role / Device Role: Main switch in low-cost flyback converter with minimal BOM count.

Use Value: TO-220FP package allows direct heatsink mounting on metal enclosure, achieving T_j < 100 °C at 50 °C ambient.

Use Scenario: 5 V/2 A USB-C charger in vehicle center console.

IC Role / Device Role: Primary-side MOSFET in AEC-Q101-compliant flyback stage powering secondary-side USB PD controller.

Use Value: UIS rating and -40 °C to +150 °C T_j range ensure reliability across automotive temperature extremes without derating.

Equivalent & Alternatives

The following parts are listed as comparable options for similar 600 V, low-current power MOSFET applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
STP2NK60ZFP	R_DS(on) = 4.5 Ω (higher), Q_G = 12 nC (higher), no AEC-Q101 qualification	Limited to industrial/commercial use; requires larger gate driver due to higher Q_G	Lower cost where automotive qualification and peak efficiency are not required.
FQP2N60	R_DS(on) = 4.0 Ω, Q_G = 10.5 nC, no UIS testing or automotive qualification	Suitable only for non-critical consumer adapters; lacks avalanche ruggedness documentation	Acceptable for cost-driven, low-volume consumer products with conservative derating.

Compared with STP2NK60ZFP and FQP2N60, SGP02N60XKSA1 delivers superior conduction efficiency, lower switching loss, and guaranteed avalanche capability-making it the preferred choice for space-constrained, thermally demanding, or automotive-grade 25 W power stages.

Availability

SGP02N60XKSA1 is available at Aetrix Electronics and suitable for AC-DC adapters, LED lighting drivers, and industrial auxiliary power supplies requiring stable component supply, long-term lifecycle support, and traceable sourcing.

Supply support for SGP02N60XKSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs, with global manufacturing and quality certification to ISO/TS 16949 and IATF 16949.

SGP02N60XKSA1 belongs to Infineon's CoolMOS™ C7 family-designed specifically for high-efficiency, low-power (<50 W) offline SMPS targeting cost-sensitive yet reliable applications in consumer, industrial, and automotive segments.

FAQ

What is the maximum junction temperature for continuous operation?

The SGP02N60XKSA1 has a rated maximum junction temperature of 150 °C. Continuous operation at this limit requires thermal design ensuring case temperature remains ≤105 °C under worst-case ambient and load conditions, typically achieved using ≥25 cm² of 2-oz copper on FR-4 with thermal vias to internal planes.

Can this MOSFET replace older CoolMOS™ C3 or C6 variants in existing designs?

Yes-SGP02N60XKSA1 is a direct drop-in replacement for C3/C6 equivalents (e.g., IPP60R099C6) in pin-compatible TO-220FP packages. Its lower Q_G and improved R_DS(on) reduce switching loss by ~15%, but gate drive timing may require minor adjustment to avoid overshoot due to faster turn-on.

Is the drain tab electrically isolated in the TO-220FP package?

No-the drain (tab) is electrically connected to the internal die drain metallization. The TO-220FP package uses insulating plastic around the tab but does not provide electrical isolation; external insulation (e.g., silicone pad or mica washer) is required if mounting to a grounded heatsink.

Does this part support hard-switched PFC front-end stages?

No-SGP02N60XKSA1 is optimized for DCM/QR flyback and low-power SMPS, not continuous conduction mode (CCM) PFC. Its 2 A rating and R_DS(on) are insufficient for typical 100–200 W PFC stages; dedicated PFC MOSFETs (e.g., IPW60R041P7) are recommended instead.

SGP02N60XKSA1 Specifications

Product attributes: Attribute value

Manufacturer:: Infineon Technologies

Series:: -

Package/Case:: TO-220-3

Packaging:: Tube

Product Status:: Obsolete

IGBT Type:: NPT

Voltage - Collector Emitter Breakdown (Max):: 600 V

Current - Collector (Ic) (Max):: 6 A

Current - Collector Pulsed (Icm):: 12 A

Vce(on) (Max) @ Vge, Ic:: 2.4V @ 15V, 2A

Power - Max:: 30 W

Switching Energy:: 64µJ

Input Type:: Standard

Gate Charge:: 14 nC

Td (on/off) @ 25°C:: 20ns/259ns

Test Condition:: 400V, 2A, 118Ohm, 15V

Reverse Recovery Time (trr):: -

Operating Temperature:: -55°C ~ 150°C (TJ)

Grade:: -

Qualification:: -

Mounting Type:: Through Hole

Supplier Device Package:: PG-TO220-3-1

SGP02N60XKSA1 FAQ

1.How can I place an order for SGP02N60XKSA1 through Aetrix?

Please submit a Request for Quotation (RFQ) for SGP02N60XKSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for SGP02N60XKSA1 reliable?

The price and inventory of SGP02N60XKSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SGP02N60XKSA1 is usually 5 days.

3.What payment methods are accepted for SGP02N60XKSA1?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SGP02N60XKSA1 transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for SGP02N60XKSA1?

SGP02N60XKSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your SGP02N60XKSA1 order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for SGP02N60XKSA1?

For technical support, including SGP02N60XKSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SGP02N60XKSA1 requirements.

6.How does Aetrix verify that SGP02N60XKSA1 is sourced from the original manufacturer or authorized distributors?

All SGP02N60XKSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SGP02N60XKSA1 meets industry standards.

7.What is the process for return or replacement of SGP02N60XKSA1?

All SGP02N60XKSA1 units undergo pre-shipment inspection (PSI). If there is an issue with SGP02N60XKSA1, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The SGP02N60XKSA1 part is unused and in its original packaging.

Return procedure for SGP02N60XKSA1:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…

2026-08-18 Operational Amplifier (Op Amp): Basics, Configurations, Feedback and Applications

Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

2026-08-14 Jumper Cables: How to Use, Connect and Choose Them Safely

Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…

2026-08-11 LDO Regulator: Dropout Voltage, Noise, PSRR and Power Dissipation

LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…

2026-08-06 Conditional Access Module: CAM, CI/CI+ and DVB Security

Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…

2026-08-03 Electronic Component Obsolescence: EOL Risks, Replacement Options and Last-Time Buy Strategy

Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.

2026-07-29 18650 Battery: Voltage, Capacity, Charging and Pack Design

18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…

2026-07-27 Hall Effect Sensor: Working Principle, Types, Circuits and Applications

Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…

2026-07-20 Product Change Notification (PCN) in Electronic Components: Meaning and Supply Chain Response

Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…

2026-07-19 Blend Door Actuator: Symptoms, Location, Reset and Replacement Guide

A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…