My Inquiry
My Account
STMicroelectronics STGD10NC60HT4
- Part No.:
- STGD10NC60HT4
- Manufacturer:
- STMicroelectronics
- Category:
- Single IGBTs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
STGD10NC60HT4.pdf
- Description:
- IGBT 600V 20A 60W DPAK
- Quantity:
- Payment:
- Shipping:
Inventory:2,395
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STGD10NC60HT4 from STMicroelectronics is a 600 V, 10 A N-channel very fast IGBT in DPAK (TO-252) package, optimized for resonant and soft-switching topologies. It delivers 2.5 V VCE(sat) at 5 A/15 VGE, 8.3 pF Cres, and 22 nC total gate charge, enabling high-frequency motor controls and PFC stages in SMPS.
For engineers reviewing the STGD10NC60HT4 datasheet, STGD10NC60HT4 pinout, STGD10NC60HT4 application, or STGD10NC60HT4 equivalent, key selection criteria include VCE(sat) stability at 125°C, low Cres/Cies ratio to prevent cross-conduction, and thermal resistance of 2.08 °C/W junction-to-case for reliable 10 A continuous operation.
Technical Context
This IGBT uses ST's PowerMESH™ process to balance switching speed and conduction loss. Its 14.2 ns turn-on delay and 27 ns off-voltage rise time support >100 kHz operation in ZVS/ZCS circuits, while the 920 A/μs di/dton at 125°C ensures robust hard-switching capability.
The device features a 3.75–5.75 V gate threshold voltage and ±20 V gate-emitter rating, compatible with standard 15 V gate drivers. Its 150 µA ICES at 600 V and 25°C confirms low leakage for high-voltage hold-off integrity.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCES | 600 V - supports DC bus voltages up to 400 V AC input rectified systems with margin |
| IC @ 100°C | 10 A - continuous current rating at elevated temperature for thermally constrained designs |
| VCE(sat) | 2.5 V max @ 5 A, 15 VGE - low conduction loss enabling <1.25 W dissipation at rated current |
| Cres | 8.3 pF - low reverse transfer capacitance minimizes Miller-induced false turn-on in bridge legs |
| Rthj-case | 2.08 °C/W - enables 60 W power dissipation with ≤125°C case temperature rise |
| Qg | 22 nC - moderate gate drive energy requirement compatible with standard IGBT drivers |
| Eoff | 95 μJ @ 390 V, 5 A - quantifies turn-off loss for thermal modeling in high-frequency PFC |
Pinout & Package
DPAK (TO-252) package with exposed tab for thermal and electrical connection; standardized footprint per Figure 19 (DS12871 Rev 1, p.14), tape-and-reel packaging (2500 pcs/reel).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| G | Gate | Control terminal accepting ±20 V rating; requires 22 nC charge for full enhancement |
| C | Collector (Tab) | Main high-side power terminal; electrically and thermally connected to exposed copper tab |
| E | Emitter | Power return path and reference for gate drive; isolated from tab in DPAK type C2 variant |
Key Features
| Feature | Design Value |
|---|---|
| Low VCE(sat) | 2.5 V max at 5 A ensures <1.25 W conduction loss, reducing heatsink requirements |
| Low Cres/Cies ratio | 8.3 pF / 365 pF = 0.023 - suppresses Miller feedback, enabling stable half-bridge operation |
| Fast switching | 14.2 ns td(on), 27 ns tr(Voff) - supports >150 kHz resonant converter designs |
| High-temperature reliability | Rated for 150°C junction operation with 1 mA ICES at 125°C, ensuring stability in sealed enclosures |
Applications
| Motor Drive Inverter Stage | Active PFC Boost Converter |
|---|---|
Use Scenario: 3-phase BLDC inverter operating at 20–40 kHz with sinusoidal PWM. IC Role / Device Role / Timing Role: High-side/low-side switching element in 6-pack configuration, handling 10 A peak phase current. Use Value: Low 2.5 V VCE(sat) reduces conduction loss by ~15% vs. comparable 650 V IGBTs, improving inverter efficiency at partial load. | Use Scenario: 2.5 kW single-phase boost PFC stage in server PSU with 100 kHz switching. IC Role / Device Role / Timing Role: Main switch in critical conduction mode (CRM) or transition-mode (TM) topology. Use Value: 8.3 pF Cres minimizes voltage-dependent gate charge, enabling clean zero-current switching across line cycle. |
| Resonant LLC Primary Switch | Industrial SMPS Half-Bridge |
Use Scenario: 1 kW LLC resonant converter with variable frequency control from 100–300 kHz. IC Role / Device Role / Timing Role: Primary-side switching device in symmetrical half-bridge, subject to ZVS turn-on. Use Value: 22 nC Qg and 14.2 ns td(on) allow precise timing control for optimal ZVS window alignment. | Use Scenario: 500 W industrial open-frame SMPS using hard-switched asymmetric half-bridge. IC Role / Device Role / Timing Role: High-side switch enduring 600 V DC link with 10 A pulsed current. Use Value: 40 A ICL pulsed rating and 2.08 °C/W Rthj-case sustain short overloads without thermal runaway. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar IGBT switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IXGH10N60B3 | Higher VCE(sat) (2.7 V), higher Qg (35 nC), TO-247 package | Requires larger heatsink and higher gate drive power; better suited for lower-frequency (<50 kHz) hard-switched designs | Select when higher ruggedness and avalanche rating are prioritized over switching speed |
| FGB3040G2 | Lower VCE(sat) (2.2 V), lower Cres (5.5 pF), same DPAK package | Better suited for ultra-high-frequency (>300 kHz) resonant converters where Miller immunity is critical | Select when minimizing EMI and maximizing ZVS margin outweighs cost sensitivity |
Compared with IXGH10N60B3 and FGB3040G2, STGD10NC60HT4 offers the best balance of low gate charge (22 nC), moderate VCE(sat) (2.5 V), and industry-standard DPAK thermal performance-ideal for cost-sensitive, medium-frequency PFC and motor drives requiring compact layout.
Availability
STGD10NC60HT4 is available at Aetrix Electronics and suitable for high-frequency motor controls, active PFC stages, and resonant LLC converters requiring stable component supply and consistent DPAK thermal performance.
Supply support for STGD10NC60HT4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, microcontroller, power, and sensor solutions for industrial, automotive, and consumer markets.
This device belongs to ST's PowerMESH™ IGBT product line, engineered specifically for high-efficiency, high-frequency power conversion in SMPS, PFC, and motor control applications where switching loss and thermal management are critical.
FAQ
What is the maximum gate-emitter voltage rating for STGD10NC60HT4?
The absolute maximum gate-emitter voltage is ±20 V, with recommended operating range of –10 V to +15 V. Exceeding ±20 V risks permanent gate oxide damage. Gate drive circuits must include clamping or active regulation to avoid transient overshoot during switching transitions.
Does STGD10NC60HT4 have an integrated anti-parallel diode?
No, STGD10NC60HT4 is a discrete N-channel IGBT without an integrated freewheeling diode. External ultrafast or SiC Schottky diodes must be used in bridge configurations to handle reverse recovery current and ensure safe commutation.
What is the thermal resistance from junction to ambient for this device?
Rthj-amb is 62.5 °C/W under standard PCB mounting conditions (1-inch² 2-oz copper pad). This value assumes no heatsink; actual system-level thermal performance depends on PCB layout, airflow, and enclosure design-junction temperature must remain ≤150°C under worst-case load.
Can STGD10NC60HT4 be used in avalanche mode?
No, STGD10NC60HT4 is not rated for repetitive avalanche operation. Its datasheet does not specify avalanche energy (EAS) or ruggedness testing. Operation beyond VCES (600 V) may cause irreversible failure; appropriate snubbers or clamping circuits are required in inductive switching applications.
STGD10NC60HT4 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- PowerMESH™
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- IGBT Type:
- -
- Voltage - Collector Emitter Breakdown (Max):
- 600 V
- Current - Collector (Ic) (Max):
- 20 A
- Current - Collector Pulsed (Icm):
- -
- Vce(on) (Max) @ Vge, Ic:
- 2.5V @ 15V, 5A
- Power - Max:
- 60 W
- Switching Energy:
- 31.8µJ (on), 95µJ (off)
- Input Type:
- Standard
- Gate Charge:
- 19.2 nC
- Td (on/off) @ 25°C:
- 14.2ns/72ns
- Test Condition:
- 390V, 5A, 10Ohm, 15V
- Reverse Recovery Time (trr):
- -
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DPAK
STGD10NC60HT4 FAQ
1.How can I place an order for STGD10NC60HT4 through Aetrix?
Please submit a Request for Quotation (RFQ) for STGD10NC60HT4 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STGD10NC60HT4 reliable?
The price and inventory of STGD10NC60HT4 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STGD10NC60HT4 is usually 5 days.
3.What payment methods are accepted for STGD10NC60HT4?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STGD10NC60HT4 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STGD10NC60HT4?
STGD10NC60HT4 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STGD10NC60HT4 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STGD10NC60HT4?
For technical support, including STGD10NC60HT4 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STGD10NC60HT4 requirements.
6.How does Aetrix verify that STGD10NC60HT4 is sourced from the original manufacturer or authorized distributors?
All STGD10NC60HT4 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STGD10NC60HT4 meets industry standards.
7.What is the process for return or replacement of STGD10NC60HT4?
All STGD10NC60HT4 units undergo pre-shipment inspection (PSI). If there is an issue with STGD10NC60HT4, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STGD10NC60HT4 part is unused and in its original packaging.
Return procedure for STGD10NC60HT4:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STGD10NC60HT4 Tags
;;2.jpg)
-
STGD3NB60SDT4
STMicroelectronics
-
HGTD1N120BNS9A
onsemi
-
STGF7NB60SL
STMicroelectronics
-
FGD5T120SH
onsemi
-
STGB3NC120HDT4
STMicroelectronics
-
IKP20N60TXKSA1
Infineon Technologies
-
STGW30H60DFB
STMicroelectronics
-
STGB30M65DF2
STMicroelectronics
-
IKB20N60TATMA1
Infineon Technologies
-
STGB30V60DF
STMicroelectronics
-
IKW30N60DTPXKSA1
Infineon Technologies
-
ISL9V3040P3
onsemi
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
