My Inquiry
My Account
STMicroelectronics STGF19NC60KD
- Part No.:
- STGF19NC60KD
- Manufacturer:
- STMicroelectronics
- Category:
- Single IGBTs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
STGF19NC60KD.pdf
- Description:
- IGBT 600V 16A 32W TO220FP
- Quantity:
- Payment:
- Shipping:
Inventory:2,101
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STGF19NC60KD from STMicroelectronics is a 20 A, 600 V short-circuit rugged IGBT co-packaged with an ultra-fast soft-recovery freewheeling diode in TO-220FP package. It features 2.75 V VCE(sat) at 12 A/25 °C, 10 μs short-circuit withstand time at 300 V and 125 °C, and 28 pF Cres for low cross-conduction risk-used in high-frequency motor drives and inverters requiring fast switching and robust fault handling.
For engineers reviewing the STGF19NC60KD datasheet, STGF19NC60KD pinout, STGF19NC60KD application, or STGF19NC60KD equivalent, key selection criteria include its 10 μs short-circuit capability, 2.75 V saturation voltage, ultra-soft diode recovery (31 ns trr), and thermal resistance of 3.9 °C/W (junction-to-case, IGBT).
Technical Context
This IGBT employs ST's PowerMESH process to optimize trade-offs between conduction loss and switching speed. Its low Cres/Cies ratio (28/1170 pF) minimizes Miller-induced turn-on risk, while the integrated diode delivers 1.9 V forward voltage and 31 ns reverse recovery time at 12 A/25 °C.
The device operates within a junction temperature range up to 150 °C and supports gate drive voltages from ±20 V. Its RBSOA and short-circuit rating are validated under VCE = 300 V, TJ = 125 °C, RG = 10 Ω, and VGE = 12 V conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCES | 600 V - maximum blocking voltage for 600 V bus applications without derating |
| IC (TC = 100 °C) | 10 A - continuous current rating at heatsink temperature, defining thermal design margin |
| VCE(sat) @ 12 A, 25 °C | 2.75 V - low conduction loss enabling <1.5 W static dissipation at rated current |
| tscw | 10 μs - enables reliable overcurrent protection using fast gate-drive shutdown circuits |
| Cres | 28 pF - low reverse transfer capacitance reduces susceptibility to false turn-on during high dv/dt |
| trr (diode) | 31 ns - ultra-fast, soft recovery minimizes voltage overshoot and EMI in inductive switching |
| RthJC (IGBT) | 3.9 °C/W - junction-to-case thermal resistance for TO-220FP, guiding heatsink sizing |
Pinout & Package
STGF19NC60KD uses the TO-220FP (Full-Pak) package with insulated tab, enabling direct mounting to heatsinks without isolation hardware. The plastic body provides creepage/clearance compliance per IEC 60664-1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (G) | Gate | Control input requiring 15 V nominal drive; ±20 V absolute max limits gate oxide stress |
| 2 (C) | Collector | Main power output terminal; electrically connected to insulated metal tab for thermal path |
| 3 (E) | Emitter | Power return and gate reference node; must be low-inductance layout to avoid shoot-through |
Key Features
| Feature | Design Value |
|---|---|
| Low VCE(sat) | 2.75 V @ 12 A/25 °C reduces conduction loss by ~25% vs. standard 600 V IGBTs in same package |
| Ultra-soft diode | 31 ns trr, 2.0 A Irrm, and softness factor >1.5 suppress voltage spikes in motor drive freewheeling |
| Short-circuit ruggedness | 10 μs withstand time at 300 V/125 °C allows use with simple fixed-time desaturation protection |
| Low Cres/Cies ratio | 28/1170 pF = 0.024 - minimizes Miller feedback, enabling stable operation at >20 kHz with 10 Ω gate resistor |
Applications
| Industrial Motor Drives | High-Frequency Inverters |
|---|---|
|
Use Scenario: 3-phase BLDC or induction motor control in HVAC compressors and industrial pumps operating at 8–16 kHz PWM frequency. IC Role / Device Role / Timing Role: Main switching device in inverter leg; handles 10 A RMS load current with 600 V DC bus. Use Value: Low VCE(sat) and soft diode reduce system losses and EMI, enabling smaller heatsinks and passive EMI filters. |
Use Scenario: Solar micro-inverters and UPS inverters converting DC to 50/60 Hz AC with high-efficiency transformerless topologies. IC Role / Device Role / Timing Role: High-side/low-side switch in H-bridge; switched at 12–20 kHz to minimize audible noise and core loss. Use Value: 10 μs short-circuit rating supports fast fault response; low Cres ensures clean commutation under high dv/dt. |
| Electric Power Tools | Appliance Inverters |
|
Use Scenario: Cordless drill and angle grinder inverters driving brushed or brushless motors with aggressive torque transients. IC Role / Device Role / Timing Role: Primary power switch in half-bridge configuration; subjected to repetitive 50–100 A surge currents during stall events. Use Value: Integrated diode with 50 A IFSM and 31 ns trr handles regenerative energy without external snubbers. |
Use Scenario: Variable-speed compressor control in refrigerators and washing machines using field-oriented control (FOC). IC Role / Device Role / Timing Role: Inverter switch operating at 10–15 kHz with tight thermal constraints inside sealed enclosures. Use Value: TO-220FP's insulated tab eliminates need for mica washers; RthJC = 3.9 °C/W enables compact thermal design. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar IGBT switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STGP19NC60KD | TO-220 package (non-insulated tab); RthJC = 1.0 °C/W (lower thermal resistance) but requires electrical isolation hardware | Better thermal performance in open-frame industrial drives where isolation is managed externally | Select when heatsink mounting permits isolation pads and lower junction temperature is critical |
| STGB19NC60KDT4 | D²PAK (TO-263) surface-mount package; same electrical specs but 1.0 °C/W RthJC and higher IC rating (35 A @ 25 °C) | Suitable for automated SMT assembly and space-constrained PCBs in consumer inverters | Select for reflow-compatible designs needing higher peak current capability and smaller footprint |
Compared with STGP19NC60KD and STGB19NC60KDT4, STGF19NC60KD uniquely combines TO-220FP's insulated-tab mechanical safety with mid-tier thermal resistance (3.9 °C/W), making it optimal for cost-sensitive, semi-automated industrial assemblies where isolation and serviceability are prioritized over ultimate power density.
Availability
STGF19NC60KD is available at Aetrix Electronics and suitable for industrial motor drives, high-frequency inverters, and appliance inverters requiring stable component supply across multi-year production cycles.
Supply support for STGF19NC60KD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, digital, and mixed-signal ICs for automotive, industrial, and power applications.
This device belongs to ST's PowerMESH IGBT family, engineered specifically for high-efficiency, high-reliability switching in 600 V motor control and inverter systems demanding rugged short-circuit behavior and low EMI.
FAQ
What is the maximum gate-emitter voltage rating for STGF19NC60KD?
The absolute maximum gate-emitter voltage is ±20 V, with recommended operating range of –10 V to +15 V. Exceeding ±20 V risks permanent gate oxide damage. Gate drive circuits must include clamping or Zener protection to ensure this limit is never breached during transients or layout parasitics.
Does STGF19NC60KD require a negative gate voltage for reliable turn-off?
No negative gate voltage is required; the device fully turns off with 0 V gate drive. However, applying –5 V to –10 V improves noise immunity and reduces Miller-induced false turn-on in high dv/dt environments such as three-phase bridge configurations with fast-switching adjacent legs.
Can the integrated diode replace an external freewheeling diode in all cases?
Yes-the co-packaged ultra-fast soft-recovery diode is fully rated for the IGBT's current and voltage class (20 A RMS, 600 V blocking), with 31 ns trr and 50 A IFSM. It eliminates discrete diode placement and matching, but layout must maintain symmetric current paths to avoid thermal imbalance between die and diode.
What is the recommended gate resistor value for 15 kHz switching in a motor drive?
A 10 Ω gate resistor is validated in the datasheet for 15 kHz operation with 12 A load current, delivering 105 ns td(off) and 85 ns tf at 25 °C. For thermal margin at 125 °C junction, increase to 12–15 Ω to limit Eoff rise and maintain safe SOA boundaries under short-circuit conditions.
STGF19NC60KD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- PowerMESH™
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Active
- IGBT Type:
- -
- Voltage - Collector Emitter Breakdown (Max):
- 600 V
- Current - Collector (Ic) (Max):
- 16 A
- Current - Collector Pulsed (Icm):
- 75 A
- Vce(on) (Max) @ Vge, Ic:
- 2.75V @ 15V, 12A
- Power - Max:
- 32 W
- Switching Energy:
- 165µJ (on), 255µJ (off)
- Input Type:
- Standard
- Gate Charge:
- 55 nC
- Td (on/off) @ 25°C:
- 30ns/105ns
- Test Condition:
- 480V, 12A, 10Ohm, 15V
- Reverse Recovery Time (trr):
- 31 ns
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FP
STGF19NC60KD FAQ
1.How can I place an order for STGF19NC60KD through Aetrix?
Please submit a Request for Quotation (RFQ) for STGF19NC60KD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STGF19NC60KD reliable?
The price and inventory of STGF19NC60KD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STGF19NC60KD is usually 5 days.
3.What payment methods are accepted for STGF19NC60KD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STGF19NC60KD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STGF19NC60KD?
STGF19NC60KD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STGF19NC60KD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STGF19NC60KD?
For technical support, including STGF19NC60KD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STGF19NC60KD requirements.
6.How does Aetrix verify that STGF19NC60KD is sourced from the original manufacturer or authorized distributors?
All STGF19NC60KD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STGF19NC60KD meets industry standards.
7.What is the process for return or replacement of STGF19NC60KD?
All STGF19NC60KD units undergo pre-shipment inspection (PSI). If there is an issue with STGF19NC60KD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STGF19NC60KD part is unused and in its original packaging.
Return procedure for STGF19NC60KD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STGF19NC60KD Tags
;;2.jpg)
-
STGD3NB60SDT4
STMicroelectronics
-
HGTD1N120BNS9A
onsemi
-
STGF7NB60SL
STMicroelectronics
-
FGD5T120SH
onsemi
-
STGB3NC120HDT4
STMicroelectronics
-
IKP20N60TXKSA1
Infineon Technologies
-
STGW30H60DFB
STMicroelectronics
-
STGB30M65DF2
STMicroelectronics
-
IKB20N60TATMA1
Infineon Technologies
-
STGB30V60DF
STMicroelectronics
-
IKW30N60DTPXKSA1
Infineon Technologies
-
ISL9V3040P3
onsemi
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
