My Inquiry
My Account
STMicroelectronics STGF7NC60HD
- Part No.:
- STGF7NC60HD
- Manufacturer:
- STMicroelectronics
- Category:
- Single IGBTs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
STGF7NC60HD.pdf
- Description:
- IGBT 600V 10A 25W TO220FP
- Quantity:
- Payment:
- Shipping:
Inventory:3,850
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STGF7NC60HD from STMicroelectronics is a 600 V, 14 A very fast IGBT with ultra-fast soft-recovery antiparallel diode, designed for high-frequency switching in hard-switched and resonant topologies. It features low VCE(sat) (2.5 V @ 7 A), low Cres/Cies ratio (17/720 pF), and 35–48 nC total gate charge - enabling efficient operation in SMPS, PFC, and motor drives up to ~100 kHz.
For engineers reviewing the STGF7NC60HD datasheet, STGF7NC60HD pinout, STGF7NC60HD application, or STGF7NC60HD equivalent, key selection criteria include its 1.56 °C/W junction-to-case thermal resistance, 37 ns diode reverse recovery time at 25 °C, 1060 A/μs turn-on di/dt, and compatibility with 15 V gate drive in TO-220 and D²PAK packages.
Technical Context
This IGBT employs ST's PowerMESH process to optimize conduction loss versus switching speed trade-off. Its integrated ultra-soft diode exhibits low Qrr (40 nC) and minimal voltage overshoot during commutation, reducing snubber requirements in bridge configurations.
The device operates with ±20 V gate-emitter rating and 3.75–5.75 V threshold voltage, supporting robust gate control across temperature. Dynamic performance is characterized under 390 V bus, 7 A load, and 10 Ω gate resistor - yielding 18.5 ns turn-on delay and 72 ns turn-off delay at 25 °C.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCES | 600 V - supports 400 V AC input rectified systems with 50% safety margin |
| IC (TC = 100 °C) | 14 A - continuous current capability at industrial operating temperature |
| VCE(sat) | 2.5 V @ 7 A, 25 °C - enables <17.5 W conduction loss at rated current |
| Eoff | 150 µJ @ 390 V, 7 A - defines maximum usable switching frequency before thermal runaway |
| Qg | 48 nC max - determines gate driver peak current requirement (~4.8 A for 10 ns rise) |
| trr (diode) | 37 ns @ 7 A, 40 V - ensures clean commutation in half-bridge ZVS circuits |
| RthJC | 1.56 °C/W - allows 50 °C ΔT rise at 80 W dissipation, defining heatsink sizing |
Pinout & Package
STGF7NC60HD is available in TO-220 package with 3-pin configuration: Pin 1 = Gate (G), Pin 2 = Collector (C), Pin 3 = Emitter (E); metal tab is electrically connected to collector. Thermal path relies on case-to-heatsink interface via the tab.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (G) | Gate control terminal | Accepts 15 V logic-level drive; requires ≥±100 nA leakage tolerance and 48 nC total charge |
| 2 (C) | High-side power switch node | Connected to DC bus; carries full load current and withstands 600 V blocking |
| 3 (E) | Emitter reference and return path | Serves as source for gate drive return and current sensing reference point |
| Tab (C) | Collector thermal & electrical connection | Electrically tied to pin 2; must be isolated from chassis unless system design permits common-collector topology |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-soft diode recovery | Qrr = 40 nC, trr = 37 ns - minimizes voltage spikes and EMI in bridge-leg commutation |
| Low Cres/Cies ratio | 17/720 pF = 0.024 - reduces cross-conduction risk during gate transition in half-bridge |
| PowerMESH trench structure | Optimized carrier lifetime for 2.5 V VCE(sat) and 1060 A/μs di/dt - balances efficiency and speed |
| 150 °C max junction rating | Enables operation in sealed enclosures with 75 °C case temp - supports industrial ambient requirements |
Applications
| High-Frequency SMPS | PFC Boost Converter |
|---|---|
Use Scenario: 65–100 kHz flyback or forward converter in telecom power supplies. IC Role / Device Role / Timing Role: Primary-side main switch handling 400 V DC bus and delivering up to 300 W output. Use Value: Low VCE(sat) and soft diode reduce conduction loss and eliminate need for external diode snubbers. | Use Scenario: Active boost PFC stage in 1–2 kW server PSU with THD <5%. IC Role / Device Role / Timing Role: Fast-switching switch in continuous conduction mode (CCM) topology. Use Value: 1060 A/μs di/dt and 37 ns trr enable stable zero-current switching at 70 kHz without oscillation. |
| Motor Drive Inverter | Resonant LLC Converter |
Use Scenario: 3-phase inverter for 0.75–2.2 kW HVAC compressors. IC Role / Device Role / Timing Role: Half-bridge leg switch controlling sinusoidal PWM-fed induction motor. Use Value: Ultra-soft diode prevents shoot-through during dead-time and reduces gate driver stress. | Use Scenario: Primary-side switch in 300–500 W LLC resonant converter for LED drivers. IC Role / Device Role / Timing Role: Zero-voltage switching (ZVS) capable switch operating at 200–500 kHz fundamental. Use Value: Low Cres/Cies ratio ensures reliable ZVS initiation across line/load variations. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fast IGBT applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STGB7NC60HDT4 | D²PAK package, same die, RthJC = 1.56 °C/W, tape-and-reel packaging | Better suited for automated SMT assembly; identical electrical specs | Select when surface-mount layout and reflow compatibility are required |
| STGP7NC60HD | TO-220 package, same die, identical RthJC, tube packaging | Same thermal and switching performance; manual through-hole assembly only | Select when prototyping, repair, or low-volume through-hole production is used |
Compared with STGB7NC60HDT4 and STGP7NC60HD, STGF7NC60HD shares identical silicon characteristics but differs in packaging format and ordering code - making it functionally interchangeable where TO-220 mechanical fit and lead-forming are acceptable.
Availability
STGF7NC60HD is available at Aetrix Electronics and suitable for high-frequency SMPS, PFC boost converters, and motor drive inverters requiring stable component supply and long-term industrial lifecycle support.
Supply support for STGF7NC60HD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, microcontroller, power, and sensor solutions for industrial, automotive, and consumer markets.
This part belongs to ST's PowerMESH IGBT product line, engineered specifically for high-efficiency, high-frequency power conversion in compact industrial and computing power supplies.
FAQ
What is the maximum gate-emitter voltage rating for STGF7NC60HD?
The absolute maximum VGE is ±20 V. Operation beyond this risks permanent gate oxide damage. Recommended gate drive is +15 V for turn-on and –5 to –10 V for turn-off to ensure robust noise immunity and prevent spurious conduction during high dv/dt events.
Does STGF7NC60HD include an integrated antiparallel diode?
Yes - it integrates a monolithic ultra-soft fast-recovery diode with 37 ns reverse recovery time and 40 nC Qrr at 25 °C. This diode is co-packaged and electrically matched to the IGBT die, eliminating discrete diode placement and parasitic mismatch in half-bridge designs.
Can STGF7NC60HD be used in zero-voltage switching (ZVS) topologies?
Yes - its low Cres/Cies ratio (0.024) and soft diode recovery enable reliable ZVS initiation in LLC and phase-shifted full-bridge converters. Verified operation up to 500 kHz fundamental with proper gate resistor tuning and bus voltage derating.
What is the thermal resistance from junction to case (RthJC) for STGF7NC60HD?
RthJC is 1.56 °C/W, measured from junction to the metal tab. This value assumes full thermal contact between tab and heatsink with ≤0.1 mm thermal interface material thickness. It defines the upper bound of steady-state power dissipation at a given case temperature.
STGF7NC60HD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- PowerMESH™
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Obsolete
- IGBT Type:
- -
- Voltage - Collector Emitter Breakdown (Max):
- 600 V
- Current - Collector (Ic) (Max):
- 10 A
- Current - Collector Pulsed (Icm):
- 50 A
- Vce(on) (Max) @ Vge, Ic:
- 2.5V @ 15V, 7A
- Power - Max:
- 25 W
- Switching Energy:
- 95µJ (on), 115µJ (off)
- Input Type:
- Standard
- Gate Charge:
- 35 nC
- Td (on/off) @ 25°C:
- 18.5ns/72ns
- Test Condition:
- 390V, 7A, 10Ohm, 15V
- Reverse Recovery Time (trr):
- 37 ns
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220FP
STGF7NC60HD FAQ
1.How can I place an order for STGF7NC60HD through Aetrix?
Please submit a Request for Quotation (RFQ) for STGF7NC60HD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STGF7NC60HD reliable?
The price and inventory of STGF7NC60HD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STGF7NC60HD is usually 5 days.
3.What payment methods are accepted for STGF7NC60HD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STGF7NC60HD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STGF7NC60HD?
STGF7NC60HD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STGF7NC60HD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STGF7NC60HD?
For technical support, including STGF7NC60HD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STGF7NC60HD requirements.
6.How does Aetrix verify that STGF7NC60HD is sourced from the original manufacturer or authorized distributors?
All STGF7NC60HD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STGF7NC60HD meets industry standards.
7.What is the process for return or replacement of STGF7NC60HD?
All STGF7NC60HD units undergo pre-shipment inspection (PSI). If there is an issue with STGF7NC60HD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STGF7NC60HD part is unused and in its original packaging.
Return procedure for STGF7NC60HD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STGF7NC60HD Tags
;;2.jpg)
-
STGD3NB60SDT4
STMicroelectronics
-
HGTD1N120BNS9A
onsemi
-
STGF7NB60SL
STMicroelectronics
-
FGD5T120SH
onsemi
-
STGB3NC120HDT4
STMicroelectronics
-
IKP20N60TXKSA1
Infineon Technologies
-
STGW30H60DFB
STMicroelectronics
-
STGB30M65DF2
STMicroelectronics
-
IKB20N60TATMA1
Infineon Technologies
-
STGB30V60DF
STMicroelectronics
-
IKW30N60DTPXKSA1
Infineon Technologies
-
ISL9V3040P3
onsemi
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
