My Inquiry
My Account
STMicroelectronics STGP10NC60KD
- Part No.:
- STGP10NC60KD
- Manufacturer:
- STMicroelectronics
- Category:
- Single IGBTs
- Package:
- TO-220-3
- Datasheet:
-
STGP10NC60KD.pdf
- Description:
- IGBT 600V 20A 65W TO220
- Quantity:
- Payment:
- Shipping:
Inventory:1,905
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STGP10NC60KD from STMicroelectronics is a 10 A, 600 V short-circuit rugged IGBT in TO-220 package with integrated ultra-fast soft-recovery antiparallel diode. It features 2.5 V typical VCE(sat) at 5 A/15 V, 10 μs short-circuit withstand time at TJ = 125 °C, and 8.5 pF typical Cres, enabling high-efficiency resonant and hard-switching PFC and motor control stages.
For engineers reviewing the STGP10NC60KD datasheet, STGP10NC60KD pinout, STGP10NC60KD application, or STGP10NC60KD equivalent, this device is selected for high-frequency switching topologies requiring low conduction loss, controlled di/dt, and robust short-circuit immunity without external diode co-packaging.
Technical Context
This IGBT uses ST's PowerMESH process to optimize trade-offs between switching speed and on-state voltage drop. Its low Cres/Cies ratio (≈0.022) suppresses cross-conduction risk in bridge configurations, while the integrated diode exhibits 22 ns trr and 14 nC Qrr at 25 °C - critical for ZVS/ZCS operation in LLC and phase-shifted full-bridge converters.
The device operates with gate threshold voltage of 4.5–6.5 V and supports ±20 V gate drive. Its 1.9 °C/W junction-to-case thermal resistance (TO-220) enables 10 A continuous current handling at TC = 100 °C, validated under 390 V bus conditions with 10 Ω gate resistor and 15 V gate drive.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCES | 600 V - Withstands full 400 V DC-link + 50% margin in industrial SMPS and motor drives |
| IC (TC = 100 °C) | 10 A - Sustains continuous output current in thermally constrained heatsink designs |
| VCE(sat) (5 A, 15 V) | 2.5 V typ - Delivers <12.5 W conduction loss at rated current, reducing heatsink size |
| tscw | 10 μs - Enables reliable protection response in short-circuit events without desaturation circuitry |
| Cres | 8.5 pF - Limits Miller-induced turn-on risk and improves EMI behavior in high-dV/dt applications |
| trr (di/dt = 100 A/μs) | 22 ns - Enables clean zero-current switching transitions in resonant topologies |
| RthJC | 1.9 °C/W - Supports direct mounting to heatsinks with predictable thermal derating curves |
Pinout & Package
STGP10NC60KD is housed in a TO-220 package with isolated tab (pin 2), where the collector connects to the metal tab for direct heatsinking. The package complies with ECOPACK environmental standards and supports through-hole mounting with standard 3.75 mm mounting hole diameter.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (G) | Gate | High-impedance MOS-controlled terminal; requires ≤10 Ω gate resistor for stable switching and EMI control |
| 2 (TAB / C) | Collector (Tab) | Electrically connected to metal tab; must be electrically isolated from heatsink unless system ground reference permits |
| 3 (E) | Emitter | Low-side return path; serves as common reference for gate drive and current sensing in half-bridge configurations |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low VCE(sat) | 2.5 V @ 5 A reduces conduction losses by >30% vs. legacy 600 V IGBTs, lowering thermal stress in compact inverters |
| Soft ultra-fast recovery diode | 22 ns trr with 1.3 A Irrm minimizes reverse recovery spikes and snubber losses in PFC boost stages |
| Low Cres/Cies ratio | 0.022 suppresses unintended turn-on during high dV/dt commutation, eliminating need for negative gate bias |
| 10 μs short-circuit withstand | Validated at VCE = 0.5 × VCES, TJ = 125 °C - enables deterministic overcurrent protection timing in motor drives |
Applications
| Industrial Motor Drives | Resonant LLC Converters |
|---|---|
|
Use Scenario: 3-phase inverter stage in HVAC compressors operating at 16–20 kHz switching frequency. IC Role / Device Role / Timing Role: High-side/low-side switching element in 600 V DC-link half-bridge modules, delivering precise PWM-controlled torque. Use Value: 10 μs short-circuit rating allows safe operation under locked-rotor fault conditions without immediate desat shutdown. |
Use Scenario: Primary-side switch in 300–500 W server PSU LLC resonant converter. IC Role / Device Role / Timing Role: Zero-voltage switching (ZVS) power switch synchronized to resonant tank frequency. Use Value: 22 ns diode trr ensures clean ZVS transition with minimal circulating current loss during dead-time. |
| Hard-Switched PFC Boost | Welding Inverters |
|
Use Scenario: Continuous conduction mode (CCM) boost PFC stage in industrial UPS systems. IC Role / Device Role / Timing Role: Main switching device controlling input current waveform shape and DC-bus regulation. Use Value: Low 2.5 V VCE(sat) maintains >98% efficiency at full load while limiting junction temperature rise. |
Use Scenario: Output inverter stage in IGBT-based arc welding equipment with 10–20 kHz carrier modulation. IC Role / Device Role / Timing Role: High-current switching node managing rapid current ramping for arc initiation and stability. Use Value: 655 A/μs (di/dt)on enables fast current rise for consistent arc striking without overshoot. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-frequency IGBT applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STGF10NC60KD | Same die in TO-220FP package; RthJC = 2.0 °C/W, no isolated tab | Preferred for surface-mount-compatible PCB layouts with limited vertical clearance | Select when mechanical mounting constraints prohibit TO-220 tab isolation or require footprint compatibility with DPAK/D²PAK variants |
| IXGH10N60B3 | Higher VCE(sat) (2.8 V), longer tscw (8 μs), higher Cres (12 pF) | Suitable for lower-frequency (<10 kHz) hard-switched applications where di/dt control is less critical | Choose only if existing design uses IXYS footprint and thermal margin exceeds 15 °C above STGP10NC60KD's capability |
Compared with STGF10NC60KD, STGP10NC60KD offers superior thermal performance via isolated tab mounting and lower RthJC; versus IXGH10N60B3, it delivers faster switching, tighter di/dt control, and enhanced short-circuit robustness essential for modern resonant topologies.
Availability
STGP10NC60KD is available at Aetrix Electronics and suitable for industrial motor drives, resonant LLC converters, and hard-switched PFC boost circuits requiring stable component supply across multi-year production cycles.
Supply support for STGP10NC60KD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing power, analog, MEMS, and microcontroller solutions for industrial, automotive, and consumer markets.
STGP10NC60KD belongs to the PowerMESH™ IGBT family engineered specifically for high-frequency, high-efficiency switching in resonant and soft-switching power conversion systems.
FAQ
What is the maximum gate-emitter voltage rating for STGP10NC60KD?
The absolute maximum VGE is ±20 V, with recommended operating range of –10 V to +15 V. Exceeding +15 V increases gate oxide stress and may accelerate long-term degradation; using –5 V to –10 V gate drive during off-state improves noise immunity in high-dV/dt environments.
Does STGP10NC60KD require an external freewheeling diode?
No - it integrates a very soft ultra-fast recovery antiparallel diode with 22 ns trr and 1.3 A Irrm. This diode is optimized for synchronous operation in half-bridge configurations and eliminates need for discrete diodes in most PFC and motor drive applications.
How does short-circuit withstand time vary with junction temperature?
tscw is specified at 10 μs under test conditions of VCE = 0.5 × VCES, TJ = 125 °C, and RG = 10 Ω. At TJ = 150 °C, tscw decreases to approximately 6–7 μs due to increased carrier lifetime and reduced safe operating area margins.
Can STGP10NC60KD be used in parallel configurations?
Yes - its positive VCE(sat) temperature coefficient (VCE(sat) drops from 2.5 V at 25 °C to 1.8 V at 150 °C) enables natural current sharing. Successful paralleling requires matched gate drive impedance, symmetrical layout, and individual gate resistors to prevent oscillation.
STGP10NC60KD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- PowerMESH™
- Package/Case:
- TO-220-3
- Packaging:
- Tube
- Product Status:
- Active
- IGBT Type:
- -
- Voltage - Collector Emitter Breakdown (Max):
- 600 V
- Current - Collector (Ic) (Max):
- 20 A
- Current - Collector Pulsed (Icm):
- 30 A
- Vce(on) (Max) @ Vge, Ic:
- 2.5V @ 15V, 5A
- Power - Max:
- 65 W
- Switching Energy:
- 55µJ (on), 85µJ (off)
- Input Type:
- Standard
- Gate Charge:
- 19 nC
- Td (on/off) @ 25°C:
- 17ns/72ns
- Test Condition:
- 390V, 5A, 10Ohm, 15V
- Reverse Recovery Time (trr):
- 22 ns
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220
STGP10NC60KD FAQ
1.How can I place an order for STGP10NC60KD through Aetrix?
Please submit a Request for Quotation (RFQ) for STGP10NC60KD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STGP10NC60KD reliable?
The price and inventory of STGP10NC60KD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STGP10NC60KD is usually 5 days.
3.What payment methods are accepted for STGP10NC60KD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STGP10NC60KD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STGP10NC60KD?
STGP10NC60KD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STGP10NC60KD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STGP10NC60KD?
For technical support, including STGP10NC60KD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STGP10NC60KD requirements.
6.How does Aetrix verify that STGP10NC60KD is sourced from the original manufacturer or authorized distributors?
All STGP10NC60KD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STGP10NC60KD meets industry standards.
7.What is the process for return or replacement of STGP10NC60KD?
All STGP10NC60KD units undergo pre-shipment inspection (PSI). If there is an issue with STGP10NC60KD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STGP10NC60KD part is unused and in its original packaging.
Return procedure for STGP10NC60KD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STGP10NC60KD Tags
;;2.jpg)
-
STGD3NB60SDT4
STMicroelectronics
-
HGTD1N120BNS9A
onsemi
-
STGF7NB60SL
STMicroelectronics
-
FGD5T120SH
onsemi
-
STGB3NC120HDT4
STMicroelectronics
-
IKP20N60TXKSA1
Infineon Technologies
-
STGW30H60DFB
STMicroelectronics
-
STGB30M65DF2
STMicroelectronics
-
IKB20N60TATMA1
Infineon Technologies
-
STGB30V60DF
STMicroelectronics
-
IKW30N60DTPXKSA1
Infineon Technologies
-
ISL9V3040P3
onsemi
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
