Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Discrete Semiconductor Products > Transistors > IGBTs > Single IGBTs

STMicroelectronics STGP8NC60K

Name: STGP8NC60K
Brand: STMicroelectronics
SKU: STGP8NC60K
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: STGP8NC60K

Manufacturer:: STMicroelectronics

Category:: Single IGBTs

Package:: TO-220-3

Datasheet:: STGP8NC60K.pdf

Description:: IGBT 600V 15A 65W TO220

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:4,597

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

STGP8NC60K from STMicroelectronics is an N-channel 600V, 8A short-circuit-rated PowerMESH™ IGBT in TO-220 package, optimized for high-frequency motor control and resonant SMPS topologies. It delivers 2.2V typical V_CE(sat) at 3A/25°C, 10µs short-circuit withstand time, and features a very soft ultra-fast recovery antiparallel diode integrated in the same die.

For engineers reviewing the STGP8NC60K datasheet, STGP8NC60K pinout, STGP8NC60K application, or STGP8NC60K equivalent, key selection criteria include V_CE(sat) stability over temperature, C_RES/C_IES ratio for cross-conduction immunity, gate charge (19nC total), thermal resistance (1.9°C/W junction-to-case), and short-circuit ruggedness in hard-switched PFC stages.

Technical Context

This IGBT employs ST's patented high-voltage strip layout to minimize conduction and switching losses simultaneously. Its low C_RES/C_IES ratio (8.5pF / 380pF ≈ 0.022) suppresses Miller-induced turn-on risk during high di/dt commutation, while the co-packaged diode exhibits soft reverse recovery with minimal voltage overshoot.

The device is rated for continuous collector current of 8A at T_C = 100°C and supports pulsed operation up to 30A. Switching performance is characterized at V_CC = 390V, I_C = 3A, R_G = 10Ω, with turn-off delay (t_d(off)) of 72ns at 25°C and 106ns at 125°C - confirming robust high-temperature timing stability.

Key Specifications

Parameter	Value and Actual Design Meaning
V_CE Rating	600V - supports 400V DC bus designs with ≥50% voltage margin for transient clamping
V_CE(sat)	2.2V typ @ 3A, 25°C - enables <1.7W conduction loss at 8A, reducing heatsink requirements
Short-Circuit Withstand	10µs - allows reliable operation in motor drive fault conditions without immediate desat protection
Total Gate Charge	19nC - determines driver power requirement and switching speed trade-off with 10Ω gate resistor
Junction-to-Case R_th	1.9°C/W - enables 65W dissipation at 25°C case temperature before reaching 150°C max junction
C_RES/C_IES Ratio	0.022 - minimizes risk of spurious turn-on during high dv/dt across collector-emitter
Antiparallel Diode Recovery	Very soft ultra-fast - reduces EMI and voltage spikes in bridge-leg commutation

Pinout & Package

STGP8NC60K uses a standard TO-220 package with isolated tab (pin 2 = collector, pin 1 = emitter, pin 3 = gate). The metal tab is electrically connected to the collector and must be insulated from heatsink unless system topology permits common-collector mounting.

Pin/Terminal	Circuit Role	Design Meaning
Pin 1 (Emitter)	Power return path for main current	Low-inductance connection point for emitter bypass capacitor and current-sense resistor
Pin 2 (Collector)	Main high-side current input	Electrically tied to metal tab; requires insulating washer if heatsink is grounded
Pin 3 (Gate)	Control terminal for MOS-controlled bipolar conduction	High-impedance input requiring low-impedance gate driver (<10Ω series R) to manage 19nC charge

Key Features

Feature	Design Value
PowerMESH™ strip layout	Reduces on-state voltage drop while maintaining high breakdown integrity and rugged short-circuit capability
Optimized for high-frequency motor control	Enables PWM frequencies >20kHz in servo inverters without excessive switching loss penalty
Integrated soft-recovery antiparallel diode	Eliminates need for external freewheeling diode in half-bridge configurations, saving PCB area and parasitics
ECOPACK® lead-free packaging	Complies with RoHS and JEDEC JESD97 marking standards; second-level interconnect is Pb-free

Applications

Industrial Motor Inverters

Resonant PFC Stages

Use Scenario: 3-phase 0.75–2.2kW variable-speed drives for pumps and fans operating at 16–25kHz PWM.

IC Role / Device Role / Timing Role: High-side switch in 6-pack IGBT module replacement configuration; handles 8A RMS output current with 10µs fault tolerance.

Use Value: Low V_CE(sat) and soft diode reduce thermal stress on heatsink and EMI filter sizing by 30% vs. legacy 600V IGBTs.

Use Scenario: Boost-type active PFC in 1–3kW telecom rectifiers using LLC or phase-shifted full-bridge topology.

IC Role / Device Role / Timing Role: Main switching device in high-frequency boost leg; operates at 100–300kHz with zero-voltage switching assistance.

Use Value: Low C_RES/C_IES prevents false triggering during fast dv/dt transitions, improving reliability in resonant valley switching.

Hard-Switched SMPS

Appliance Motor Drivers

Use Scenario: Primary-side switch in 500W–1.5kW offline flyback or forward converters targeting energy efficiency standards (e.g., DoE Level VI).

IC Role / Device Role / Timing Role: Single-ended hard-switched transistor handling 390V DC link with 3A peak current per pulse.

Use Value: 19nC Q_g enables efficient gate driving with low-power IC drivers (e.g., STGAP2S), reducing auxiliary supply burden.

Use Scenario: BLDC motor controller in premium washing machines and HVAC blowers requiring silent operation and torque ripple suppression.

IC Role / Device Role / Timing Role: Low-side switch in 3-phase inverter stage; leverages integrated diode for regenerative braking current recirculation.

Use Value: Very soft diode recovery eliminates audible coil whine and reduces snubber component count in cost-sensitive white goods designs.

Equivalent & Alternatives

The following parts are listed as comparable options for similar IGBT switching applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
IRG4PH42UD-EP	600V/8A, 2.4V V_CE(sat), 15µs SCWT, TO-247 package	Higher thermal mass but larger footprint; better for >100W continuous dissipation	Select when higher short-circuit margin and lower thermal resistance (0.5°C/W) outweigh TO-220 size constraints
FGL60N100BNTDTU	1000V/60A, 2.7V V_CE(sat), no specified SCWT, TO-247	Over-specified voltage rating; intended for 600–800V industrial systems with surge immunity needs	Choose only if system requires 1000V blocking or field-upgrade path beyond 600V bus architectures

Compared with IRG4PH42UD-EP and FGL60N100BNTDTU, STGP8NC60K offers optimal balance of compact TO-220 form factor, 10µs short-circuit ruggedness, and low gate charge for cost-sensitive motor control - making it preferable where board space and driver simplicity are prioritized over extreme voltage headroom or ultra-high thermal capacity.

Availability

STGP8NC60K is available at Aetrix Electronics and suitable for industrial motor inverters, resonant PFC stages, and hard-switched SMPS requiring stable component supply and long-term lifecycle support.

Supply support for STGP8NC60K includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, microcontroller, power, and sensor solutions for industrial, automotive, and consumer markets.

This device belongs to ST's PowerMESH™ IGBT product line, engineered specifically for high-efficiency, high-frequency switching in motor control and power conversion systems where ruggedness and predictable short-circuit behavior are critical.

FAQ

What is the maximum continuous collector current at 100°C case temperature?

The STGP8NC60K is rated for 8A continuous collector current at T_C = 100°C, as specified in Table 2 of the datasheet. This rating assumes proper heatsinking to maintain case temperature at or below 100°C under steady-state operation, with derating applied above that temperature based on thermal resistance (1.9°C/W).

Does STGP8NC60K include an integrated antiparallel diode?

Yes - the device integrates a very soft ultra-fast recovery antiparallel diode on the same silicon die. This co-packaged diode is optimized for low reverse recovery charge (Q_rr) and softness (low di/dt during recovery), eliminating the need for discrete freewheeling diodes in half-bridge and inverter applications.

Is STGP8NC60K suitable for use in automotive applications?

No - STGP8NC60K is not qualified to AEC-Q101 or automotive-grade specifications. ST explicitly states in its datasheet disclaimer that non-automotive-grade products are not recommended for life-sustaining, safety-critical, or automotive applications unless validated by the end user under their own responsibility and risk assessment.

What is the gate-emitter leakage current specification at maximum rated voltage?

At V_GE = ±20V and V_CE = 0V, the gate-emitter leakage current is ±100nA maximum, as specified in Table 4. This low leakage ensures minimal gate drive power loss and stable turn-off behavior even under high-temperature operating conditions up to 125°C junction temperature.

STGP8NC60K Specifications

Product attributes: Attribute value

Manufacturer:: STMicroelectronics

Series:: PowerMESH™

Package/Case:: TO-220-3

Packaging:: Tube

Product Status:: Obsolete

IGBT Type:: -

Voltage - Collector Emitter Breakdown (Max):: 600 V

Current - Collector (Ic) (Max):: 15 A

Current - Collector Pulsed (Icm):: 30 A

Vce(on) (Max) @ Vge, Ic:: 2.75V @ 15V, 3A

Power - Max:: 65 W

Switching Energy:: 55µJ (on), 85µJ (off)

Input Type:: Standard

Gate Charge:: 19 nC

Td (on/off) @ 25°C:: 17ns/72ns

Test Condition:: 390V, 3A, 10Ohm, 15V

Reverse Recovery Time (trr):: -

Operating Temperature:: -55°C ~ 150°C (TJ)

Grade:: -

Qualification:: -

Mounting Type:: Through Hole

Supplier Device Package:: TO-220

STGP8NC60K FAQ

1.How can I place an order for STGP8NC60K through Aetrix?

Please submit a Request for Quotation (RFQ) for STGP8NC60K on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for STGP8NC60K reliable?

The price and inventory of STGP8NC60K are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STGP8NC60K is usually 5 days.

3.What payment methods are accepted for STGP8NC60K?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STGP8NC60K transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for STGP8NC60K?

STGP8NC60K orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your STGP8NC60K order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for STGP8NC60K?

For technical support, including STGP8NC60K datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STGP8NC60K requirements.

6.How does Aetrix verify that STGP8NC60K is sourced from the original manufacturer or authorized distributors?

All STGP8NC60K products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STGP8NC60K meets industry standards.

7.What is the process for return or replacement of STGP8NC60K?

All STGP8NC60K units undergo pre-shipment inspection (PSI). If there is an issue with STGP8NC60K, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The STGP8NC60K part is unused and in its original packaging.

Return procedure for STGP8NC60K:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-09-08 Obsolete Electronic Components: How to Source and Evaluate Replacements

A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.

2026-09-07 TTL vs CMOS Logic Levels: 74HC and 74HCT Compatibility Explained

TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.

2026-09-04 Logic Level Shifter: How to Connect 3.3V and 5V Logic Safely

A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.

2026-09-03 74HC595 vs TPIC6B595: Output Drive, Pinout, Current, and Load Selection

The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…

2026-09-02 74HC595 Pinout, Timing, Output Current, and Applications

The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…

2026-09-01 Latch vs Flip-Flop: Timing, Differences and Design Choices

A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…

2026-08-30 D Latch Circuit: Truth Table, Timing, ICs and Applications

A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …

2026-08-28 SR Latch Explained: NOR and NAND Circuits, Truth Tables, and Applications

An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…