My Inquiry
My Account
Infineon Technologies BCR08PNH6727XTSA1
- Part No.:
- BCR08PNH6727XTSA1
- Manufacturer:
- Infineon Technologies
- Category:
- Bipolar Transistor Arrays, Pre-Biased
- Package:
- 6-VSSOP, SC-88, SOT-363
- Datasheet:
-
BCR08PNH6727XTSA1.pdf
- Description:
- TRANS PREBIAS NPN/PNP 50V SOT363
- Quantity:
- Payment:
- Shipping:
Inventory:2,314
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BCR08PNH6727XTSA1 from Infineon Technologies is a dual NPN/PNP silicon digital transistor array in SOT-363 package, featuring integrated bias resistors (R1 = 2.2 kΩ, R2 = 47 kΩ), 50 V VCEO, 100 mA IC, and AEC-Q101 qualification for automotive interface and switching applications.
For engineers reviewing the BCR08PNH6727XTSA1 datasheet, BCR08PNH6727XTSA1 pinout, BCR08PNH6727XTSA1 application, or BCR08PNH6727XTSA1 equivalent, this device serves as a galvanically isolated dual-channel logic-level switch with defined input thresholds (Vi(on) ≤ 1.1 V, Vi(off) ≥ 0.4 V) and low saturation voltage (VCE(sat) ≤ 0.3 V at IC = 10 mA).
Technical Context
This dual-transistor array integrates one NPN and one PNP digital transistor with monolithically embedded base bias networks-enabling direct TTL/CMOS-level drive without external resistors. Both transistors share identical maximum ratings (50 V VCEO, 100 mA IC) and thermal limits (Tj = 150 °C, RthJS ≤ 140 K/W).
Its galvanic isolation between channels allows independent control of high-side (PNP) and low-side (NPN) switching paths in level-shifting interfaces. The fixed R1/R2 ratio (0.047 typ.) ensures consistent turn-on/turn-off behavior across temperature (–40 °C to 125 °C) and supply variations.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - supports 24 V automotive bus interfacing with margin |
| IC | 100 mA - drives small relays, LEDs, or logic inputs directly |
| VCE(sat) | ≤ 0.3 V @ IC = 10 mA - minimizes conduction loss in switching mode |
| R1 / R2 | 0.047 typ. - sets predictable input current gain and noise immunity |
| fT | 170 MHz typ. - enables reliable operation up to ~10 MHz digital switching |
| Tj max | 150 °C - qualified for under-hood automotive environments |
| AEC-Q101 | Qualified - meets stress test requirements for automotive electronics |
Pinout & Package
SOT-363 (SC-88) surface-mount package: 6-pin, 2.1 mm × 1.25 mm footprint, 0.65 mm pitch, gull-wing leads, RoHS-compliant matte tin plating.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (E1) | NPN Emitter | Common emitter node for first transistor; tied to GND in low-side switch config |
| 2 (B1) | NPN Base (via R1) | Input terminal for NPN channel; internal 2.2 kΩ resistor to base |
| 3 (C2) | PNP Collector | Output node for second transistor; connects to load in high-side switch |
| 4 (E2) | PNP Emitter | Common emitter node for PNP channel; tied to VCC in high-side config |
| 5 (B2) | PNP Base (via R1) | Input terminal for PNP channel; internal 2.2 kΩ resistor to base |
| 6 (C1) | NPN Collector | Output node for first transistor; connects to load in low-side switch |
Key Features
| Feature | Design Value |
|---|---|
| Dual NPN/PNP topology | Enables complementary push-pull or level-shifted output stages without discrete biasing |
| Integrated R1/R2 network | Eliminates four external resistors per channel, reducing PCB area and BOM count |
| Galvanic channel isolation | Prevents crosstalk between NPN and PNP sections in mixed-voltage interface designs |
| Automotive-grade qualification | AEC-Q101 compliance ensures reliability in engine control, body electronics, and ADAS subsystems |
| Low VCE(sat) | 0.3 V max at 10 mA supports efficient 3.3 V/5 V logic-driven loads with minimal heat rise |
Applications
| Automotive Body Control Module | Industrial PLC Input Interface |
|---|---|
Use Scenario: Driving LED status indicators and small solenoids from microcontroller GPIOs in door modules and lighting controllers. IC Role / Device Role: Dual-channel level-shifting switch translating 3.3 V MCU outputs to 12 V/24 V loads. Use Value: Eliminates need for separate NPN+PNP pairs and bias resistors, cutting board space by >40% vs discrete solution. | Use Scenario: Isolating and conditioning 24 V DC field sensor signals before feeding into 5 V logic inputs. IC Role / Device Role: Input buffer with built-in pull-up/pull-down biasing and noise filtering via R1/R2 network. Use Value: Reduces external component count by 6 parts per channel while maintaining AEC-Q101 robustness. |
| Automotive HVAC Actuator Driver | Consumer Appliance Motor Control |
Use Scenario: Controlling bidirectional DC motor direction in climate control flaps using H-bridge half-bridge segments. IC Role / Device Role: Complementary switch pair providing high-side (PNP) and low-side (NPN) drive capability. Use Value: Enables compact, thermally stable half-bridge section with matched VCE(sat) and hFE tracking across temperature. | Use Scenario: Replacing mechanical relays in washing machine detergent dispensers and pump controls. IC Role / Device Role: Solid-state relay substitute with integrated logic-level drive and fail-safe cutoff. Use Value: Supports 100,000+ switching cycles with no contact wear, meeting IEC 60730 Class B safety requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual digital transistor array applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BCR108S | Same SOT-363 package, identical pinout, but R1 = 4.7 kΩ (vs 2.2 kΩ); lower input sensitivity | Requires higher drive voltage (Vi(on) up to 1.3 V); less suitable for 3.3 V logic | Select when interfacing with 5 V CMOS or open-collector drivers needing higher noise margin |
| NSVD2101PT3G | Single NPN+PNP array in SOT-563; R1 = 2.2 kΩ, R2 = 47 kΩ; same electrical specs but different pinout (1=C1, 2=B1, 3=E1, 4=E2, 5=B2, 6=C2) | Not pin-compatible; requires PCB redesign but offers identical functional performance | Choose for new designs where SOT-563 footprint is preferred or when sourcing flexibility is critical |
Compared with BCR08PNH6727XTSA1, BCR108S trades input sensitivity for noise immunity, while NSVD2101PT3G delivers identical functionality in a non-pin-compatible package-making the original optimal for drop-in replacement in existing AEC-Q101-compliant layouts.
Availability
BCR08PNH6727XTSA1 is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC input conditioning, and appliance motor control requiring stable component supply and long-term lifecycle assurance.
Supply support for BCR08PNH6727XTSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive ICs, and industrial control solutions, with global R&D and manufacturing infrastructure.
BCR08PN belongs to Infineon's BCRx family of automotive-qualified digital transistors, designed specifically for replacing discrete transistor-resistor combinations in harsh-environment interface circuits.
FAQ
What is the maximum operating temperature for BCR08PNH6727XTSA1?
The junction temperature rating is 150 °C, and the device is qualified per AEC-Q101 for continuous operation from –40 °C to 125 °C ambient. Derating curves in the datasheet define permissible power dissipation versus case temperature (TS), with full 250 mW rated at TS = 115 °C.
Can BCR08PNH6727XTSA1 replace two separate digital transistors in a circuit?
Yes-it integrates one NPN and one PNP digital transistor with matched bias networks in a single SOT-363 package. Each channel operates independently with galvanic isolation, eliminating four external resistors and saving PCB area versus discrete implementations.
Is the pinout compatible with standard SOT-363 logic devices?
No-BCR08PNH6727XTSA1 uses a custom pin mapping: Pin 1=E1, Pin 2=B1, Pin 3=C2, Pin 4=E2, Pin 5=B2, Pin 6=C1. This differs from generic SOT-363 logic ICs and must be verified against the official Infineon outline drawing EHA07176.
Does this part support PWM switching at high frequency?
With a typical transition frequency fT of 170 MHz and measured VCE(sat) stability up to 125 °C, it supports clean switching up to ~10 MHz in low-duty-cycle applications. For sustained 100 kHz+ PWM, thermal design must respect RthJS ≤ 140 K/W and pulse derating curves in Figure 5.
BCR08PNH6727XTSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- 6-VSSOP, SC-88, SOT-363
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Last Time Buy
- Transistor Type:
- 1 NPN, 1 PNP - Pre-Biased (Dual)
- Current - Collector (Ic) (Max):
- 100mA
- Voltage - Collector Emitter Breakdown (Max):
- 50V
- Resistor - Base (R1):
- 2.2kOhms
- Resistor - Emitter Base (R2):
- 47kOhms
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 70 @ 5mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 300mV @ 500µA, 10mA
- Current - Collector Cutoff (Max):
- -
- Frequency - Transition:
- 170MHz
- Power - Max:
- 250mW
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-SOT363-PO
BCR08PNH6727XTSA1 FAQ
1.How can I place an order for BCR08PNH6727XTSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for BCR08PNH6727XTSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BCR08PNH6727XTSA1 reliable?
The price and inventory of BCR08PNH6727XTSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BCR08PNH6727XTSA1 is usually 5 days.
3.What payment methods are accepted for BCR08PNH6727XTSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BCR08PNH6727XTSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BCR08PNH6727XTSA1?
BCR08PNH6727XTSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BCR08PNH6727XTSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BCR08PNH6727XTSA1?
For technical support, including BCR08PNH6727XTSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BCR08PNH6727XTSA1 requirements.
6.How does Aetrix verify that BCR08PNH6727XTSA1 is sourced from the original manufacturer or authorized distributors?
All BCR08PNH6727XTSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BCR08PNH6727XTSA1 meets industry standards.
7.What is the process for return or replacement of BCR08PNH6727XTSA1?
All BCR08PNH6727XTSA1 units undergo pre-shipment inspection (PSI). If there is an issue with BCR08PNH6727XTSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BCR08PNH6727XTSA1 part is unused and in its original packaging.
Return procedure for BCR08PNH6727XTSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BCR08PNH6727XTSA1 Tags
-
SMUN5311DW1T1G
onsemi
-
UMH9NTN
Rohm Semiconductor
-
PUMH13,115
Nexperia USA Inc.
-
PUMD3-QX
Nexperia USA Inc.
-
PUMD2,115
Nexperia USA Inc.
-
RN4987FE,LF(CT
Toshiba Semiconductor and Storage
-
PUMD12,115
Nexperia USA Inc.
-
PUMD9,115
Nexperia USA Inc.
-
PUMH9,115
Nexperia USA Inc.
-
PUMD3,115
Nexperia USA Inc.
-
DCX114EU-7-F
Diodes Incorporated
-
PUMD13,115
Nexperia USA Inc.
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
