My Inquiry
My Account
Nexperia USA Inc. PUMB18,115
- Part No.:
- PUMB18,115
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Bipolar Transistor Arrays, Pre-Biased
- Package:
- 6-TSSOP, SC-88, SOT-363
- Datasheet:
-
PUMB18,115.pdf
- Description:
- TRANS PREBIAS 2PNP 50V 6TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:6,853
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PUMB18 from Nexperia is a dual PNP resistor-equipped transistor (RET) in SOT363 (SC-88) package, configured as two independent PNP transistors with integrated bias resistors R₁ = 4.7 kΩ and R₂ = 10 kΩ. It delivers −100 mA output current per transistor, supports −50 V collector-emitter voltage, and is AEC-Q101 qualified for automotive signal conditioning and digital interface control.
For engineers reviewing the PUMB18 datasheet, PUMB18 pinout, PUMB18 application, or PUMB18 equivalent, this device serves as a space-optimized, pick-and-place–friendly replacement for discrete PNP pairs in low-power logic-level shifting, LED driver enable control, and microcontroller I/O buffering where built-in biasing reduces BOM count and layout complexity.
Technical Context
The PUMB18 integrates two matched PNP transistors with monolithically embedded base bias networks-R₁ connects base to input, R₂ connects base to emitter-enabling direct TTL/CMOS-compatible switching without external resistors. Each transistor operates with VCEO = −50 V and IO = −100 mA under DC conditions.
Its SC-88 (SOT363) package provides six terminals with GND–input–output topology per transistor, supporting high-density routing in portable and automotive ECUs. Thermal resistance is 417 K/W per device on FR4 PCB, and fT reaches 180 MHz at IC = −10 mA, confirming suitability for medium-speed digital switching up to ~10 MHz.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | −50 V: Maximum safe collector-emitter voltage with open base; enables use in 24 V automotive supply rails with margin. |
| IO | −100 mA: Continuous DC output current per transistor; sufficient for driving LEDs, small relays, or logic inputs. |
| R₁ | 4.7 kΩ ±27%: Integrated input bias resistor; sets base current for standard logic-level drive (e.g., 3.3 V MCU GPIO). |
| R₂/R₁ ratio | 2.1 typ (1.7–2.6): Ensures stable saturation and predictable turn-off behavior across temperature and process variation. |
| VCE(sat) | −100 mV max at IC = −10 mA, IB = −0.5 mA: Low saturation voltage minimizes power loss in active-switching applications. |
| fT | 180 MHz typ at VCE = −5 V, IC = −10 mA: Confirms usable bandwidth for fast digital edge transitions and PWM control. |
| AEC-Q101 | Qualified: Validated for automotive-grade reliability including temperature cycling, HTRB, and ESD testing per JESD22-A110/A114. |
Pinout & Package
SOT363 (SC-88) is a 6-pin ultra-small surface-mount plastic package measuring 2.2 mm × 1.35 mm × 0.95 mm, optimized for high-density PCB layouts in space-constrained modules.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND (emitter) TR1 | Emitter connection of first PNP transistor; common reference node for its internal bias network. |
| 2 | input (base) TR1 | Input terminal for TR1; connects externally to logic signal and internally to R₁ (4.7 kΩ) and R₂ (10 kΩ). |
| 3 | output (collector) TR2 | Collector of second PNP transistor; active-low output node for load switching or level translation. |
| 4 | GND (emitter) TR2 | Emitter connection of second PNP transistor; electrically isolated from Pin 1 but same potential in typical usage. |
| 5 | input (base) TR2 | Input terminal for TR2; identical bias configuration to Pin 2, enabling independent dual-channel control. |
| 6 | output (collector) TR1 | Collector of first PNP transistor; complements Pin 3 for dual-output, non-inverting or inverting configurations. |
Key Features
| Feature | Design Value |
|---|---|
| Dual PNP RET architecture | Two fully independent PNP transistors with matched R₁/R₂ networks reduce component count by 4× vs discrete equivalents. |
| AEC-Q101 qualification | Validated for automotive under-hood and body-control applications requiring −40 °C to +125 °C operation and long-term reliability. |
| Low VCE(sat) | ≤ −100 mV ensures <10 mW conduction loss at 100 mA, critical for thermally constrained modules and battery-powered systems. |
| SC-88 footprint compatibility | SOT363 package aligns with industry-standard reflow profiles and automated placement equipment, minimizing assembly cost and yield risk. |
| VI(on)/VI(off) thresholds | −1.5 V typ VI(on) and −0.9 V typ VI(off) provide robust noise immunity against 3.3 V logic rail fluctuations in noisy environments. |
Applications
| Automotive Door Module | Industrial PLC Input Isolation |
|---|---|
|
Use Scenario: Level-shifting and buffering of LIN bus wake-up signals into microcontroller GPIO pins. IC Role / Device Role / Timing Role: Dual-channel active-low switch translating 12 V wake pulses to 3.3 V logic levels while providing current limiting and ESD protection via built-in resistors. Use Value: Eliminates four external resistors and two transistors per channel, reducing PCB area by >30% and improving signal integrity through matched internal R₁/R₂ ratios. |
Use Scenario: Optocoupler replacement in 24 V DC digital input stages of programmable logic controllers. IC Role / Device Role / Timing Role: High-impedance input stage converting field-side 24 V signals to isolated 5 V logic levels using PNP sink configuration. Use Value: Achieves <1 µA leakage (ICEO) and −50 V VCEO, enabling direct connection to industrial sensors without additional clamping diodes. |
| Consumer Wearable Power Sequencing | Medical Sensor Interface |
|
Use Scenario: Controlled enable/disable sequencing of multiple low-power sensor ICs during sleep/wake cycles. IC Role / Device Role / Timing Role: Dual low-side switch controlling VDD enable lines for MEMS accelerometers and environmental sensors. Use Value: −100 mV VCE(sat) limits voltage drop to <0.1 V at 50 mA, preserving regulation accuracy and extending battery life in coin-cell–powered devices. |
Use Scenario: Isolating analog front-end biasing circuits from digital controller noise in portable ECG monitors. IC Role / Device Role / Timing Role: Low-noise PNP switch decoupling reference voltage sources during ADC sampling windows. Use Value: 3 pF collector capacitance and 180 MHz fT ensure minimal capacitive coupling and fast settling (<100 ns), maintaining signal fidelity in sub-µV biomedical measurements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual PNP resistor-equipped transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NSVD2T2227XV6T1G | PNP/PNP RET in SOT-563; R₁ = 22 kΩ, R₂ = 47 kΩ; lower IO (−50 mA); no AEC-Q101 rating. | Targeted at consumer portables only; unsuitable for automotive due to missing qualification and reduced current capability. | Select only for cost-sensitive, non-automotive designs where higher input impedance and lower drive strength are acceptable. |
| EMH11T2R | PNP/PNP RET in SOT-363; R₁ = 10 kΩ, R₂ = 10 kΩ; identical AEC-Q101 rating; VCEO = −40 V. | Lower voltage rating restricts use to ≤12 V systems; R₂/R₁ = 1.0 eliminates gain stabilization benefit of PUMB18's 2.1 ratio. | Prefer when interfacing with 3.3 V/5 V logic exclusively and board space allows for tighter VCEO margin. |
Compared with NSVD2T2227XV6T1G and EMH11T2R, PUMB18 uniquely balances −50 V ruggedness, −100 mA drive, AEC-Q101 compliance, and optimal R₂/R₁ ratio for stable saturation-making it the only choice for 24 V automotive body electronics requiring both reliability and design margin.
Availability
PUMB18 is available at Aetrix Electronics and suitable for automotive door modules, industrial PLC input stages, wearable power sequencing, and medical sensor interfaces requiring stable component supply, long-lifecycle support, and traceable sourcing.
Supply support for PUMB18 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global leader in high-volume production of discrete semiconductors, logic devices, and PowerMOS transistors, spun off from NXP in 2017 and headquartered in Nijmegen, Netherlands.
PUMB18 belongs to Nexperia's Resistor-Equipped Transistor (RET) product line, engineered specifically to replace discrete transistor-resistor combinations in automotive and industrial digital interface applications with guaranteed matching and qualification.
FAQ
What is the maximum operating junction temperature for PUMB18?
The absolute maximum junction temperature (Tj) for PUMB18 is 150 °C, validated per IEC 60134 limiting values. At ambient temperatures up to +85 °C, continuous operation at full −100 mA load requires derating to maintain Tj ≤ 150 °C, supported by the specified Rth(j-a) = 417 K/W per device on FR4 PCB.
Can PUMB18 be used in linear amplification mode?
No-PUMB18 is characterized and qualified exclusively for switching applications. Its built-in R₁/R₂ network fixes base biasing for saturated on/off operation, and parameters like hFE are specified only at IC = −10 mA with fixed IB; no small-signal AC characteristics (e.g., gm, Cob) are guaranteed for analog gain use.
Is the SOT363 package lead-free and RoHS compliant?
Yes-PUMB18 is manufactured in full compliance with RoHS Directive 2011/65/EU and REACH Regulation (EC) No. 1907/2006. The SOT363 package uses matte tin (Sn) lead finish with no lead content exceeding 0.1 wt%, verified per JEDEC J-STD-020 moisture sensitivity level 1.
How does the R₂/R₁ ratio affect switching performance?
The R₂/R₁ ratio of 2.1 typ ensures sufficient base current for deep saturation (VCE(sat) ≤ −100 mV) while providing adequate reverse base-emitter bias during turn-off to minimize storage time. This ratio directly improves switching speed consistency across temperature and voltage variations compared to fixed-R or single-resistor RETs.
PUMB18,115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- 6-TSSOP, SC-88, SOT-363
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- 2 PNP - Pre-Biased (Dual)
- Current - Collector (Ic) (Max):
- 100mA
- Voltage - Collector Emitter Breakdown (Max):
- 50V
- Resistor - Base (R1):
- 4.7kOhms
- Resistor - Emitter Base (R2):
- 10kOhms
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 50 @ 10mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 150mV @ 500µA, 10mA
- Current - Collector Cutoff (Max):
- 1µA
- Frequency - Transition:
- -
- Power - Max:
- 300mW
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-TSSOP
PUMB18,115 FAQ
1.How can I place an order for PUMB18,115 through Aetrix?
Please submit a Request for Quotation (RFQ) for PUMB18,115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PUMB18,115 reliable?
The price and inventory of PUMB18,115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PUMB18,115 is usually 5 days.
3.What payment methods are accepted for PUMB18,115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PUMB18,115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PUMB18,115?
PUMB18,115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PUMB18,115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PUMB18,115?
For technical support, including PUMB18,115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PUMB18,115 requirements.
6.How does Aetrix verify that PUMB18,115 is sourced from the original manufacturer or authorized distributors?
All PUMB18,115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PUMB18,115 meets industry standards.
7.What is the process for return or replacement of PUMB18,115?
All PUMB18,115 units undergo pre-shipment inspection (PSI). If there is an issue with PUMB18,115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PUMB18,115 part is unused and in its original packaging.
Return procedure for PUMB18,115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PUMB18,115 Tags
-
SMUN5311DW1T1G
onsemi
-
UMH9NTN
Rohm Semiconductor
-
PUMH13,115
Nexperia USA Inc.
-
PUMD3-QX
Nexperia USA Inc.
-
PUMD2,115
Nexperia USA Inc.
-
RN4987FE,LF(CT
Toshiba Semiconductor and Storage
-
PUMD12,115
Nexperia USA Inc.
-
PUMD9,115
Nexperia USA Inc.
-
PUMH9,115
Nexperia USA Inc.
-
PUMD3,115
Nexperia USA Inc.
-
DCX114EU-7-F
Diodes Incorporated
-
PUMD13,115
Nexperia USA Inc.
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
